Krud Kutter vs. Goo Gone: What’s The Difference?
Goo Gone is safe to use on finished wood flooring. However, it’s important to avoid using it on silk, leather, suede, rubber, faux stainless steel, drywall, unfinished wood surfaces, and unsealed stone.
- Krud Kutter vs. Goo Gone: Specs & Uses
- My Hands-on Test of Krud Kutter
- My Hands-on Test of Goo Gone Adhesive Remover
Krud Kutter vs. Goo Gone: Specs & Uses
⏰Flash Point
Krud Kutter: Non-flammable
Goo Gone: 185°F TTC
🆚Composition
Krud Kutter: Proprietary blend of biodegradable surfactants, detergents and emulsifiers
Goo Gone: Contains petroleum distillates, d-limonene
🛠️Common Uses
Krud Kutter removes dirt and grime from stainless steel surfaces; removes adhesive residue from vinyl tiles; can be used as a water-based cleaner and lubricant for diamond sharpening stones; Clean BBQ Grills
Goo Gone removes adhesive and sticky substances from jars, tools, and surfaces; removes price stickers and labels from glass or plastic wine bottles; removes sticky and gooey messes, such as slime, from carpets; can be used to remove carpet glue from hardwood floors.
Technical Info
My Hands-on Test of Krud Kutter
✅Pros
Now, I mainly used Krud Kutter for thoroughly cleaning trim before painting to ensure good paint adhesion. Let me tell you, it does an amazing job at that. But what surprised me even more is how well it cleans paint years later. It’s far superior to warm soap and water or even 409. The cleaning power is outstanding, and it’s so much easier to use.
Clean the Porch
I then decided to put it to the test on my siding. We have covered porches, which are great, but since they never get rain, the siding collects a lot of dust. You don’t really notice it until you see a clean section next to a non-cleaned section. I lightly sprayed a section with Krud Kutter and let it sit for a minute.
Then I wiped it with a sponge
soaked in warm soapy water and rinsed with clear water. The difference was astounding! What had appeared to be fine siding suddenly became brilliantly clean, while the adjacent section looked filthy. I couldn’t believe my eyes. It took me about 4 minutes to clean a 5’x5′ section, including the time it took to let it sit. It was incredibly easy, and now I feel motivated to clean the rest of the porch since everything else looks so bad in comparison.
Versatility
I’ve used it to degrease upper kitchen cabinets, remove years’ worth of Bona from linoleum, and even tackle paint spray on new floors. When using it at full strength, I recommend wearing a mask because it’s pretty potent. But diluted or concentrated, it works amazingly well.
It has transformed numerous items, making them look almost new again. Plastic or vinyl, such as my 10-year-old pink broom and dustpan, can be rejuvenated with a simple spray and scrub. I’ve also used it to clean vinyl window casings 
and painted floorboards with even the best adhesive for vinyl. It even worked wonders on our walls, but I should note that we had semi-gloss cleanable paint on them. I was initially planning to repaint some walls, but after using Krud Kutter, I only needed a bit of touch-up with a small artist paintbrush.
Bathroom Tiles and Grout
I’ve also used this product to clean my bathroom tiles and grout 
. The grout lines were discolored and stained, but after applying this solution and scrubbing lightly, they looked like new. The tiles regained their original luster, and the grout became bright and clean. It made a significant difference in the overall appearance of my bathroom.
One more example of its effectiveness is when I used it to remove stubborn stains on my patio furniture cushions. They had various marks from spills and outdoor elements. I sprayed Krud Kutter onto the stains, let it sit for a few minutes, and then washed the cushions. To my surprise, the stains disappeared completely, and the cushions looked fresh and clean.
❌Cons
The only downside is that it can be a bit “slick,” so be careful not to squeeze the bottle too hard or tip it on its side as it may leak from the top.
FAQ of Krud Kutter
Q: Can Krud Kutter effectively clean a stainless steel stove?
A: I don’t see any reason why it wouldn’t be effective.
Q: Can I use Krud Kutter to remove adhesive residue from vinyl tiles?
A: Yes and t does an excellent job of cleaning tile grout.
Q: Will Krud Kutter effectively clean rust off composite decking?
A: I’m not sure about that. However, it is highly effective for cleaning ovens and cabinets.
Q: Can I use Krud Kutter as a lubricant for diamond sharpening stones?
A: Absolutely! Krud Kutter is considered an affordable and efficient water-based cleaner and lubricant for diamond plates, such as DMT Diasharp, and bonded diamond sharpening stones, like Venev and EP diamond matrix. It helps remove swarf without causing rust like water can. It’s also non-toxic, biodegradable, and thin enough to prevent your knife from skidding on very fine stones, unlike some oils. While there are slightly better options designed specifically for this purpose, they tend to be more expensive and offer less product.
Q: Can I use it on glass shower doors?
A: Personally, I wouldn’t recommend using it on glass shower doors as it seems to leave a film behind. I had to re-clean the glass after using it to clean vinyl frames around windows.
Q: If Krud Kutter isn’t suitable for cleaning walls, what alternative do you suggest?
A: Although I wouldn’t necessarily recommend it, I have used Krud Kutter on my walls. Here’s what I did: I prepared a small bucket of warm water with a rag, sprayed a small section of the wall at a time, and immediately wiped it off with the wet rag. However, I must caution you about using it on tables. Once, I accidentally sprayed it on my table, thinking it was 409. After leaving it for about 4 minutes, it stripped off the finish in that spot.
Q: Does it work well for cleaning BBQ grills?
A: Yes, I attested it and I was very pleased with the results.
Q: Will Krud Kutter effectively clean electric cooking stoves with greasy glass tops?
A: While I have a gas stove, I can confidently say that Krud Kutter removed every bit of grease and grime from it. I believe it would work just as well on any stove, whether gas or electric, with a glass top or a traditional top. It’s truly worth its weight in gold, and I’m confident you won’t be disappointed.
Q: How effective is Krud Kutter in removing oil stains from a concrete driveway?
A: I have been using it for that purpose, and I find it works quite well. Additionally, it is biodegradable, which is a bonus.
2 reviews
📣🔥 Share it to easily keep track of the answers!
Leave a Reply
My Hands-on Test of Goo Gone Adhesive Remover
✅Pros of Goo Gone
The best part is that you only need a small amount to get the job done efficiently.
Get Floor Stickers Off
One of the uses that impressed me the most was when I tackled the stickers on my shower floor.
It was truly amazing to see how effectively to remove 3m adhesive as well.
Efficiency
Speaking of efficiency, I recently used Goo Gone to remove stubborn adhesive sticker residue from my shiny silver plastic coffee mug. Even after using dishwashing soap, there was still some annoying tackiness left behind. However, as soon as I applied Goo Gone with a paper towel, it took just about a minute to remove the large, three-inch sticky spot.
I checked if it had affected the shine of the mug 
, and after washing it with a few drops of dish soap again, it looked great—no more residual stickiness. I had tried numerous methods before, but it was Goo Gone Original Liquid that finally did the trick. Although I haven’t used the plastic scraper that came with it, I’m satisfied with the product’s performance and highly recommend it.
Goof Off Vs. Goo Gone
The main difference between Goo Gone and Goof Off is that Goo Gone is a mild citrus-based solution, while Goof Off is a potent acetone-based formula.
Goo Gone is ideal for removing residue from stickers and tape, while Goof Off is better suited for heavy-duty messes like tar, dried paint, and glue.
Versatility
In terms of versatility, Goo Gone has proven to be incredibly useful for various purposes. It helped me remove stickers from doors and cabinets effortlessly.
It’s worth mentioning that Goo Gone is not only effective for removing adhesives but also for tackling other sticky situations. For example, a glass of milk spilled on a cardboard box 
and dried, making it nearly impossible to remove from my hardwood floor. I tried various methods, but it wasn’t until I used Goo Gone along with a magic eraser that I was finally able to eliminate the remnants of the box from the floor. It’s truly a lifesaver in unexpected situations like these.
❌Cons of Goo Gone
However, I must warn you that when using Goo Gone on flooring, exercise caution as it can make the surface slippery. It’s crucial to clean the treated area thoroughly afterward to prevent any potential slipping mishaps.
FAQ of Goo Gone
Q: Can I safely use Goo Gone on foam surfaces? I need to remove tire sealant from a cushcore insert.
A: We do not recommend using Goo Gone on foam surfaces.
Q: Can I use Goo Gone to remove old dried gum from concrete?
A: Yes, it can remove gum from concrete, although the effectiveness depends on the duration and level of gum penetration.
Q: Is it suitable for use on soft, squishy surfaces like squishy balls that cannot be forcefully rubbed?
A: You might want to know the difference between goof off vs goo gone first. You can apply the product, wipe the surface, and then wash it with soap and water.
Q: Can I use Goo Gone to remove carpet glue from a hardwood floor?
A: While it is possible to remove carpet glue from a hardwood floor using Goo Gone, it may not be practical or cost-effective to use small bottles for an entire floor. If you can obtain it in bulk at a more economical price per unit, it should work well for your intended application.
Q: Is Goo Gone safe to use on hardwood floors?
A: Yes, Goo Gone is safe to use on finished wood flooring. However, it’s important to avoid using it on silk, leather, suede, rubber, faux stainless steel, drywall, unfinished wood surfaces, and unsealed stone. After applying the product, wipe the area clean and wash it with warm soapy water to remove any remaining Goo Gone residue. For stubborn messes, allow the product to sit for 5-10 minutes.
Q: Can I use Goo Gone on vinyl surfaces?
A: Yes, you can safely use Goo Gone on vinyl surfaces. After using it, make sure to wash the area with hot soapy water using a mild dish detergent like Dawn.
Q: Will it effectively remove silicone from plastic eyeglasses?
A: No, Goo Gone is not designed to remove silicone.
Q: Is it safe to use on old photos or photo albums?
A: It is not recommended to use Goo Gone on old photos. Goo Gone is specifically recommended for hard surfaces.
Q: Can Goo Gone effectively remove labels from wine bottles?
A: Yes, Goo Gone is capable of removing price stickers from glass or plastic wine bottles. Apply Goo Gone, let it sit for 5-10 minutes for stubborn messes, and then wipe the area clean with a soft, dry white cloth. Finally, thoroughly wash the surface with a mild dish detergent and hot water.
Q: Will Goo Gone remove dried-up slime from carpets?
A: Yes, Goo Gone can safely remove sticky and gooey messes from carpets. It works effectively on adhesive, crayon, gum, and glue on approved surfaces. Apply Goo Gone to a clean white cloth and gently blot the stain. Clean the area with a mild dish detergent and hot water to remove any Goo Gone residue. Goo Gone does not leave behind a scent, but if it does, continue washing the area thoroughly with hot soapy water. Read More of its function here: Rapid Remover vs. Goo Gone.
I’m Ronald Stevens, a Mechanical Engineer obsessed with adhesives, glue, and all things sticky! My passion began in childhood when I’d always be the one playing with glue during arts and crafts. And I’d spend hours researching and experimenting. Happy reading, and remember: stick with the best, and you’ll never be stuck in a mess!
Feel free to contact me and join our discussion:
Is Krud Kutter suitable for removing burnt-on food and grease from stainless steel cookware and cast iron barbeque burner grills without causing damage?
Based on my experience with Krud Kutter, I don't believe it will cause damage to stainless steel or cast iron. However, it's always a good idea to test a small area first. When it comes to burnt-on food, it may require some extra effort to remove, but I have had success using Krud Kutter on my grill (not cast iron)…Read More
Based on my experience with Krud Kutter, I don’t believe it will cause damage to stainless steel or cast iron. However, it’s always a good idea to test a small area first. When it comes to burnt-on food, it may require some extra effort to remove, but I have had success using Krud Kutter on my grill (not cast iron) with a stiff brush. Additionally, I have used it for cleaning soap scum in various areas such as the shower, cabinets, stove, and walls. Just be cautious when using it on walls and cabinets, as it may remove paint or finish in certain cases.
Show Less