Hi there! This is Ronald. In the battle of super glues, two mighty adhesives vie for your projects – E6000 vs. B7000. At first glance they seem similar, but these sticky solutions have differences that make each a champ for specific situations.
Flexibility goes to E6000 in this contest! It stretches like taffy to 900% without losing its grip. B7000 fights back with its crystal clear finish that dries transparently without white residue.
You might also want to know can b7000 be used on fabric. Don’t hesitate, we’ll cover that in the article as well.
So, b7000 vs e6000: Which adhesive reigns supreme for your project? Does E6000’s flexibility and washability win the day or does B7000’s transparent grip and precision tip take the crown?
Now, let’s see which is stronger e6000 or b7000.
E6000 vs. B7000: What’s the Difference?
If you are looking for an adhesive that can be used on many different surfaces and provides a common bond, then E6000 will be the best option. However, if you are looking for an adhesive that provides superior adhesion and stays flexible, then B7000 will be the best option for you.
E6000 is a solvent-based adhesive that sets in minutes. It is a regular adhesive that can provide a common bond. It is strong and versatile and can be used on many different surfaces ranging from plastic to fabric.
On the other hand, B7000 is a single-component epoxy that can provide superior adhesion. It is a strong bond that stays flexible. It is also environmentally friendly and transparent in color. B7000 is more specialized than E6000 and is specifically designed for use on fabric and leather.
When it comes to pricing, E6000 is much more affordable than B7000. The cost of E6000 is under $10 whereas B7000 is around $32, which is three times more expensive.
Comparison of E6000 vs B7000 for Jewelry
For years I relied solely on E6000 to attach metal components and set stones into my handcrafted designs. It’s thick and durable, able to bridge gaps between materials. But over time, some of my pieces lost their luster as the glue yellowed. The fumes during drying also forced me to work outdoors. I knew there had to be a better option.
For this I used a small piece of specialty fabric and then I used a couple rhinestones so we can test the bond more than once when we try to rip it off.Vanessa from StickyAides.com
I also put on a little patch and left it completely exposed here so we can see what the glue looks like dried on the knit fabric.
So the next morning, let’s try to rip it off. This had a really strong bond on the fabric though it is kind of difficult to spread around like with a peat brush so I would not really recommend it for fabric. The rhinestones on the other hand, this was super strong and I would absolutely recommend for rhinestones.
That’s when I discovered B7000 – an industrial-strength adhesive made for bonding metal and glass. After testing it out, I was amazed by how well it performed. Unlike E6000, B7000 cures crystal clear in just 24 hours, letting me handle pieces faster. It also remains transparent over time, keeping my jewelry looking pristine. The quick cure time and lack of fumes are so convenient.
When setting stones, I find that B7000’s thin formula penetrates all the crevices allowing for very secure holds. And it can withstand up to 250°F, meaning no worry if a piece gets warm. While E6000 is still useful for certain repairs, B7000 has become my go-to for nearly every jewelry application. I love that it creates almost invisible joints while providing superior strength.
For fellow jewelers seeking museum-quality results, I can’t recommend B7000 enough. It’s a game changer, taking the guesswork out of gluing. My jewelry looks and performs better than ever thanks to this adhesive. I only wish I had discovered it sooner. For beautiful, durable jewelry, B7000 is hands down the best glue for the job.
📝B7000 vs E6000: An Honest Review of E6000 Adhesive
This glue is transparent and thick, which means it stays in place and connects broken pieces immediately, making it perfect for crystals.
Aside from repairing crystals, I’ve used E6000 for a variety of other projects. I started using it to make haunt (scare actor) slider gloves, and I found that the adhesion was great, but it required a full 24 hours to cure. It’s also perfect for modifying 1/64 scale die-cast cars since it allows me to move parts around a bit before the glue really starts to kick in. This is something I couldn’t do with super glue. However, keep in mind that like any glue, it has an odor when you have the tube open.
I’ve also used E6000 glue for rhinestones and to create blinged-out items. The clear coat and affordability of this glue make it perfect to use. However, it can get messy, so I suggest using a toothpick to apply it. It dries quickly, so be aware of that.
It is truly amazing! It can glue almost anything, making it perfect for crafters. I used it for an outdoor project, and it was easy to use and dried quickly. The adhesion is excellent, but you need to be careful when squeezing the tube as it can get everywhere.
My wife recently used this adhesive to make eyes for her costume, using EVA foam and perforated vinyl. It stuck really well, took about 30 minutes to get tacky, and a full 24 hours to cure. It maintains flexibility but has a strong bond. However, she still needs to test it on lycra fabric to see if it burns through it.
I’ve been using E6000 glue for many years now, and I’ve never had any issues with anything I use it for. It even held a piece of rock siding that had come loose from block underpinning with no problems. This is my go-to glue for almost everything, and it takes a while to dry, but once it does, the hold is great. It’s perfect for crafters and keeps rhinestones secure. I haven’t had any issues with rhinestones falling off.
Does E6000 dry hard or rubbery?
A: E6000 dries hard, but it’s essential to give it sufficient time to hard cure.
💬 FAQ of E6000 Adhesive
Q: Is E6000 able to bond rubber to aluminum?
A: Yes, E6000 is a great choice for adhering rubber to aluminum because it creates a flexible, yet strong permanent bond between these materials. Just ensure the surfaces are properly prepped and allow adequate curing time.
Q: Can E6000 bond plastic materials together?
A: Yes, it seems to work well for attaching rhinestones to various surfaces, including plastic, as well as for other projects like attaching satin to cardboard or plastic boning to the fabric.
Q: How well would E6000 work for attaching ram horns to a metal knight helmet?
A: I have read a review where the user experienced a strong odor and toxic smell from the glue, so they decided not to use it. I cannot comment on its effectiveness for this specific application.
Q: Can I use E6000 to attach a rhinestone belt to a fabric sash?
A: Yes, you can, but be cautious about the amount of glue applied to the fabric.
Q: Is E6000 suitable for bonding polyester/cotton and Sintra together?
A: Yes, it should work effectively for that purpose.
Q: Can E6000 be used to fix a dresser handle and still be functional?
A: E6000 is quite strong, but the outcome will depend on the material and surface area of the handle.
Q: Once cured, is E6000 water-soluble?
A: Yes, it is. As an example, I used E6000 for a craft project involving magnets and clear flat marbles. When I wanted to reuse the marbles and magnets, I soaked them in soapy water to remove the glue.
Q: Can E6000 work on plexiglass?
A: Yes, it can be used on plexiglass.
Q: Can E6000 repair a broken leather purse strap?
A: I used E6000 on a canvas bag to attach a cloth ribbon, and it worked well. However, I cannot guarantee its effectiveness on leather.
Q: Can E6000 be used to attach fishing line to 1″ glass squares for hanging, while remaining inconspicuous?
A: In my experience, E6000 should work well as it dries clear. It is waterproof and very effective for various applications, although it may be too thick for paper projects. To achieve the best results, let it dry for 24 hours and avoid touching the item during this time. Use ventilation while working with the glue, and consider using toothpicks to apply it.
Q: How much surface area can one 2-ounce tube of glue cover?
A: Good question. I have been using E6000 to apply rhinestones to a pair of size 11 platform heels, and I still have some left in the larger bottle.
Q: Do I need a special tip for E6000 when using it for small rhinestones?
A: A specialized tip may not be necessary. When working with small areas, I use a toothpick to apply the glue, either directly from the tube or by dabbing it from a small amount on a paper plate.
Q: Can E6000 be used to attach felt to the bottom of a ceramic vase?
A: While I haven’t used it for that specific purpose, I have found E6000 to be effective at bonding a variety of materials, including porous surfaces like bone.
Q: Can this adhesive bond heavy glass to acrylic?
A: E6000 works well with plastic, including acrylics, and has proven effective for bonding glass to glass, even after multiple dishwasher cycles. It should work for glass to acrylic as well.
Q: Can I use E6000 to hem jeans at the cuffs?
A: Although I haven’t tried it on jeans specifically, I have used it on a pot handle with great results. I plan to use it for attaching fabric to the inside roof of my vehicle, and I believe it should work for hemming jeans as well.
Q: What is the drying time for E6000?
A: It’s recommended to allow 24 hours for full curing, but the glue should be dry to the touch within a couple of hours, depending on the amount used.
Q: Can I use this adhesive to fix the wood trim in my Mercedes that is coming undone?
A: Yes, E6000 should be able to bond the wood to your dash. However, be careful not to use too much, as any excess may be difficult to clean. Additionally, ensure the piece is temporarily secured while the glue dries to prevent shifting.
Q: Will E6000 bond leather to plastic?
A: I cannot guarantee its effectiveness for that specific application, as I haven’t tried it. However, I have successfully used it to bond plastic to plastic, ribbon to denim, plastic rhinestones to metal, and other materials.
Q: Is E6000 a cyanoacrylate type?
A: No, this adhesive is not a cyanoacrylate type. It is a craft glue designed for various applications.
📝Which is Stronger E6000 or B7000?
B7000 glue is much easier to work with compared to E6000. It is transparent and does not cloud up rhinestones. It comes with a pin embedded in the cap, making it easy to apply precisely. I found that I could use it with practically anything I needed to glue, and it provided perfect precision with no excess glue strings to clean up. The built-in syringe also eliminates the need to buy a separate one.
One of the tubes was damaged when the package arrived, and the glue had leaked, making a mess. Additionally, the glue has a strong odor, so I recommend working in a well-ventilated area and wearing a mask when using it. The glue dries quickly, so you need to be fast with your application. The applicator works well for precise application, but putting the cap back on requires a steady hand and good eyesight.
Despite the minor packaging and odor issues, the glue performs excellently and holds well. I used it to glue charms onto a clear phone case, and it worked perfectly. It’s important to let it dry for at least 24 hours and open windows to avoid inhaling the strong smell.
I have also used B7000 glue for various other projects, and I’ve been impressed with its performance every time. It’s especially great for repairing leather items, as it holds up well and doesn’t create a mess. The glue’s clear capsule prevents it from spilling out, making it easy to handle and safe for kids doing models.
My Latest Updates
👋 Hi! This is Ronald. I just published 2 new articles you may enjoy reading. Feel free to keep reading this one or 👇 check out the new articles anytime.
This glue is clear, very strong, and provides excellent adhesion. The bond sets quickly but stays flexible enough for a few minutes, allowing you to adjust the placement before it fully sets. The smell is strong, but the glue works great. It held up well through air travel and even a wedding reception’s dancing.
I used it to add rhinestones to my daughter’s prom shoes, and it worked great. The glue is easy to apply, and it dries clear. It also worked great on a pair of shoes for some rhinestones.
One of the tubes had leaked inside the pouch during shipping, making a mess. However, the glue works great, and it’s easy to handle and safe for kids doing models.
I also used B7000 glue to repair my daughter’s leather purse strap, and it worked perfectly. The glue held the strap firmly in place and allowed her to use the purse regularly again.
Can B7000 Be Used on Fabric
B7000 adhesive generally is not recommended for use on fabric or textiles. Here are some key points about using B7000 on fabric:
- B7000 is a rubber-based adhesive that is quite rigid and non-flexible when cured. This makes it poorly suited for adhering flexible fabrics.
- The fumes and odor from B7000 are also quite strong, which could end up impregnating and lingering in fabric.
- B7000 forms a thick bond and layer of adhesive when cured. This thick rigid glue line is not ideal for delicate fabrics as it may stiffen up the material.
- There are fabric/textile specific glues like fabric glues or hot melt adhesives that are more flexible and designed to not damage or alter the fabric’s feel and drape.
- If B7000 is used on fabric, it would likely only form a weak mechanical bond by soaking into the threads rather than a strong chemical adhesion. The cured glue may also crack or peel away over time as the fabric flexes.
So in summary, B7000 is not generally recommended or well-suited for use on fabrics or textiles. Specialty fabric/textile adhesives would work much better compared to B7000 for those applications.
💬 FAQ of B7000
Q: Is B7000 on cardstock?
A: It appears to function on a variety of materials.
Q: Can I wash it off if some gets on my hands?
A: I haven’t had it on my hands yet, but a small amount on my fingers came off easily.
Q: Can B7000 withstand heat?
A: It can handle the heat from a phone, but not the heat generated when soldering with a glued-in stone.
Q: Does B7000 have waterproof properties?
A: It is intended to be waterproof. After hand washing a mug I applied it to, everything remained intact.
Q: Can B7000 be used to attach rhinestone marbles to a bowling ball for outdoor garden decoration, and will grout adhere to it (between the marbles)?
A: B7000 is similar to E6000, and if you use sufficient glue and allow it to set for 24 hours before applying grout, it should work effectively. B7000 has demonstrated a stronghold in several applications.
Q: Will B7000 dry clear for transparent stones without a foggy or cloudy finish?
A: The outcome depends on the specific stone. It worked well with higher-quality rhinestones but caused a bubbly appearance when used with cheaper stones.
Q: What is the curing process for B7000?
A: It can be used at room temperature, and applying heat with a hair dryer can accelerate the drying process. Make sure to clamp down the object you’re using it for.
Q: Are there any safety concerns with this glue, similar to those with E6000?
A: Although it has a mild odor and is less potent than E6000, I experienced no issues. I used it indoors safely, but it’s still important to be cautious. Keep in mind that I’m not an expert, just a fellow consumer.
Q: Is B7000 suitable for use on fabric?
A: It performs well on fabric, drying quickly and without creating a mess.
Q: Can B7000 be used to fix a detached shoe sole?
A: Yes, it does. You might also be interested in e6000 for shoe repair.
Q: Does B7000 bond metal to metal effectively?
A: It can join metal to metal, but the strength of the bond depends on the specific application. It works well for metal jewelry or small parts, but not in high-heat or high-stress situations.
Q: Does B7000 set quickly? I need something to repair soft plastic fishing lures. If not, can you recommend an alternative?
A: E600 and E700 require a 24-hour drying time. For a faster setting option, consider using Bob Smith Industries BSI-201 Quick Cure Epoxy Clear.
If you’re ready to take your creative projects to the next level, don’t hesitate to get your hands on the “b7000.” Purchase it today from reputable retailers or visit the official website to learn more. And don’t forget to share your own experience and thoughts in the comments below!
Epoxy glues, like E6000 and B7000, are conductive adhesives that provide both electrical connectivity and physical adhesion. Several studies found epoxy glues to have competitive electrical, thermal, and mechanical properties compared to lead-based solders.1
With their sticky strengths and ideal use cases, I believe you can choose the right champion adhesive for the job.
Read More: e6000 vs e7000
- L. Gobbato, A. Scandurra and Tong Yan Tee, “Silver glues and lead-free alloys in die attach of power devices,” 2005 7th Electronic Packaging Technology Conference, Singapore, 2005, pp. 4 pp.-, doi: 10.1109/EPTC.2005.1614422. ↩︎