GS Hypo Cement Vs. E6000 is the ultimate sticky showdown. Hi, I’m Ronald. We’ll also talk about “shoe glue alternative” in this article but let us begin with this situation:
When the chips are down and the chips…well, need to be stuck back together, these are the heavyweights in the realm of adhesion you’ll find yourself reaching for. But in the epic face-off between these two titans of tackiness, which one will emerge victorious?
In this riveting guide, we’ll dissect, analyze, and compare the unique features, applications, and benefits these adhesive aristocrats bring to your crafting table or home repair kit. By the end, you’ll be armed with the knowledge to make an informed and confident choice, whether you’re tackling a delicate DIY project or fixing a favorite family heirloom.
❓ GS Hypo Cement Vs. E6000: What’s the Difference?
The main difference between GS Hypo Cement Vs. E6000 is: GS Hypo Cement is a flammable general-purpose adhesive while E6000 Craft is a non-flammable adhesive designed for crafts. E6000 has better-specified properties like viscosity, cure time, elongation, temperature range, and chemical resistance. However, E6000 contains toxic ingredients while GS Hypo Cement does not.
GS Hypo Cement is best suited for the precision bonding of delicate materials in applications requiring a neat, controlled medium-strength bond without damage. It excels at watch and jewelry repair but has limitations for heavy-duty or outdoor use.
E6000 is ideal for bonding and repairing all kinds of materials, indoors and outdoors, thanks to its superior strength, flexibility, and waterproofing. It excels at DIY, crafts, automotive and industrial applications.
📝 My Hands-on Test of GS Hypo Cement
With patience and steady hands, I fixed my watch successfully! The glue held the tiny dials in place perfectly. I’m so relieved I could fix my treasured watch myself.
It excels at restoring vintage rhinestone jewelry without yellowing or discoloring over time. It enables applying just the right amount around cup edges to securely replace stones. Many glues ruin rhinestone finishes but this one dries clear and does not degrade. I restored jewelry back in the 80s with it that still looks gorgeous. Opaque stones like pearls are best set with a gel super glue. But for clear rhinestones, this cement is unparalleled.
The formula works impressively but the tube and needle cap have serious issues. Any pressure makes glue start flowing instantly so you must be prepared to use it all. Storing upright is a must to prevent accidental oozing. Replacing the cap correctly to avoid plugging the needle hole takes practice. Bending the tube as it empties risks punctures and losing product. A more flexible tube would help. The great cement is hampered by flawed packaging. Improvements to the applicator and tube design would better contain the glue.
I must say that I love using G-S Hypo Cement glue for my jewelry making as well, specifically for gluing knots on stretch cording.
The fine-tip applicator makes it super easy to hit the right spot without getting glue on my beads.
I also use this glue for finishing off all the little projects around the house and it has stood up to water and even gluing my fingers together. Unlike some other glues, it doesn’t have a terrible smell and is priced well in line with the stores. The convenience of not having to get lost in aisles of distractions is a huge plus.
While the glue itself is exceptional, there are a couple of drawbacks that I encountered. Firstly, the fine tip on my tube seemed to have disappeared, possibly pushed down inside. This made it slightly less accurate to work with, especially since my eyesight isn’t what it once was. Additionally, I found the cap challenging to put back on, especially if there was any glue oozing out. Despite these minor inconveniences, the glue remained usable.
💬 FAQ of GS Hypo Cement
Q: Can G-S Hypo Cement be used to bond sterling silver or copper wire to itself?
A: G-S Hypo Cement is effective for bonding clean, non-porous surfaces, but it works best on flat surfaces. It is
not a super-glue type adhesive, so if you need a permanent bond, a different adhesive may be necessary. We recommend trying G-S Hypo Cement first to see if it works for your specific application. If not, residue can be removed with rubbing alcohol, nail polish remover, or acetone.
Q: How suitable is G-S Hypo Cement for use with Beadalon and other stretchy cords used in beading?
A: G-S Hypo Cement is a versatile adhesive that works well with most types of cords. It is often used to seal beading knots and for illusion jewelry among other applications. (I’ve written about e6000 vs b7000 for jewelry. Feel free to read it.) It maintains some flexibility even after drying, dries clear, and will not become yellow over time. It is a liquid adhesive, and the manufacturer can provide tips for new users upon request.
Q: I’m searching for a less toxic alternative to E6000 to glue small metal centers to the elastic or suede fabric. Could G-S Hypo Cement work?
A: G-S Hypo Cement is a medium-strength adhesive, and it might be worth trying for your application. However, it may not be the best option as the small metal centers may rub off easily, especially if the material is elastic. It is still worth giving it a shot.
Q: Does G-S Hypo Cement release with heat?
A: G-S Hypo Cement is a highly flammable product and should not be heated for any purpose. However, it’s unclear whether it releases with heat as it has not been tested for that purpose.
Q: Is G-S Hypo Cement just rubber cement in a tube with a narrow applicator?
A: No, G-S Hypo Cement
is not rubber cement. Rubber cement has a pliable, non-sturdy bond that can be pulled apart easily, while G-S Hypo Cement is closer to super glue. It creates a stiff and sturdy bond, dries clear, and is effective for bonding different materials together. BTW, I’ve compiled a list of best rubber cement. Feel free to read it.
Q: What is the difference between the orange-red packaged G-S Hypo Cement and the yellow packaged one?
A: The tube and adhesive in both packaging types are identical. Only the outer boxes differ. The orange-red box is the classic packaging, while the yellow box was designed to comply with a customer’s requirement for multiple languages on the package.
Q: Can G-S Hypo Cement be used to attach a flat tiger stone to a sterling silver ring, as the tiger eye has fallen out of the setting?
A: Yes, G-S Hypo Cement is an excellent adhesive for jewelry repair and works well on metals and stones, including plastics.
Q: Is there supposed to be a needle tip applicator on the G-S Hypo Cement product? My cap has a needle that punctures through the tube, but the application is imprecise.
My Latest Updates
👋 Hi! This is Ronald. I just published 2 new articles you may enjoy reading. Feel free to keep reading this one or 👇 check out the new articles anytime.
A: The needle tip is built into the tubing of G-S Hypo Cement. When you open the cap, you will see the needle and where the glue dispenses from.
Q: The pin has been in the closed cap of my G-S Hypo Cement tube for about a year, and now the cement moves easily in the tube but won’t come out. Should I get a new tube?
A: If the pin is still attached to the cap and not stuck in the applicator of the tube, you can try cleaning the applicator tip with nail polish remover or alcohol. This may remove any dried cement and solve the problem. If the issue persists, you may need to purchase a new tube as G-S Hypo Cement is a chemical product and should be used within a year.
Q: Would G-S Hypo Cement be good to glue glass domes onto printed images for bezels and be clear with no air bubbles?
A: G-S Hypo Cement is primarily used for holding watch crystals in place in watch bezels, but it may work for your application. However, it has not been tested for that purpose. It dries clear and should be inconspicuous.
Q: Does G-S Hypo Cement work on silicone?
A: G-S Hypo Cement is not a cyanoacrylate glue like super glue, so it will not damage surfaces, but it is effective for bonding plastic, glass, metal, and ceramic items. It may bond well with silicone, but it has not been tested for that purpose. You can try G-S Hypo Fabric Cement, which may be more suitable for your needs.
Q: Would G-S Hypo Cement work well for connecting cork leather to metal clasps for jewelry making?
A: Yes, G-S Hypo Cement can be an excellent choice for bonding cork leather to metal clasps for jewelry making. It is a medium-strength adhesive that dries clear and remains flexible, making it ideal for materials that may expand and contract with use. It is also waterproof, so it will hold up well over time.
📝Shoe Glue Alternative: An Honest Review of E6000 Adhesive
In terms of value for money, the E6000 Glue offers a large-size tube with plenty of products. This means that a single purchase goes a long way, making it a cost-effective option for jewelry makers and enthusiasts. Its high-quality formulation ensures a strong and durable bond that holds up remarkably well, even when faced with the demands of regular wear.
(see my review here: shoe goo vs e6000)
One aspect that impressed me about the E6000 Glue is its versatility. While it is designed for jewelry making and repair, it can also be used for a wide range of other applications. The manufacturer claims that it can bond plastics, metal, rubber, leather, masonry, vinyl, and wood. This flexibility makes it a valuable tool for various crafting and DIY projects.
In terms of ease of use, the E6000 Glue proved to be straightforward and hassle-free. Its user-friendly nature makes it suitable for both beginners and experienced crafters alike. Simply apply a thin layer of glue to both sides of the parts you wish to join, wait for two minutes to allow the glue to become tacky, and then press the pieces together. It’s recommended to hold them in place for 24 hours to ensure a secure bond.
While the E6000 Glue excelled in most areas, there were a few minor drawbacks to consider. Firstly, it does have a strong odor, so using it in a well-ventilated area is advisable. Additionally, the lack of a precision tip can sometimes result in excess glue oozing out, potentially creating a mess during delicate jewelry projects. However, these minor inconveniences did not significantly detract from the overall performance and reliability of the glue.
💬 FAQ of E6000 Adhesive
Q: My T-shirts still have a nauseating smell even after washing them. How can I eliminate this smell?
A: I haven’t encountered this issue myself since I use E600 for all my projects. You can try using a mixture of vinegar and baking soda as I mentioned in super glue and baking soda strength followed by a regular wash. Hopefully, that should help eliminate the smell.
Q: Can E6000 be used for a
vacuum hose connected to a truck mount?
A: I don’t believe so. You might need a vice clamp for that.
Q: Is E6000 suitable for bonding fabric and metal together permanently?
A: I think a 2-part epoxy glue would be a good option. See also 1 part epoxy vs 2 part.
Q: I want to glue coins to a mirrored medicine cabinet. Will E6000 effectively bond metal to glass in an upright position?
A: Once the glue is dry, it should hold the coins in place. However, if the cabinet is upright before the glue completely dries, the coins may slide down.
Q: Can E6000 bond magnets to brass, silver, or copper?
A: I successfully bonded aluminum to rubber using this glue. It cannot be pulled apart without tearing the rubber.
Q: I need to glue glass to glass with water resistance. Will this glue work for that purpose?
A: It should work. I use it to glue findings onto ring blanks, and I’ve worn those rings while washing hands and doing dishes without any issues. This glue is quite strong, as long as you let it dry properly.
Q: I want to attach a patch to the front of a leather-like Bible. Would this glue be suitable for that? I need something that will last a lifetime.
A: So far, it has held all the patches on my leather motorcycle vest, so it seems to be good for that purpose.
Q: Can E6000 bond plastic together?
A: Absolutely! It is effective at bonding plastic. However, you may want to explore our other glue options as well to find the one that works best for your specific needs.
Q: Can I use this to attach a rhinestone belt to a fabric sash?
A: Yes, you can use this glue for that purpose. Just be mindful of the amount you apply to the fabric.
Q: Will this glue hold Polyester/Cotton and Sintra together?
A: Yes, it should work for bonding Polyester/Cotton and Sintra.
Q: Would E6000 be suitable for gluing a dresser handle and keeping it functional?
Q: Once cured, is E6000 water-soluble?
A: Yes, it is. I have used this glue for a craft project involving magnets and clear flat marbles to create photo fridge magnets. The magnets I didn’t like, I soaked in soapy water to reuse the marble and magnet.
Q: Can it be used on plexiglass?
A: Yes, you can use it on plexiglass.
Q: Does it dry hard or rubbery?
A: It dries more rubbery, but you can trim it with scissors or a craft knife to achieve a nice finish.
Q: Would this be suitable for gluing fishing lines to the corners of 1″ glass squares for hanging? I want it to be inconspicuous.
A: In my opinion, this glue should work for your purpose. It dries clear and is waterproof. However, I would advise using it in a well-ventilated area, especially if there are kids around. After 24 hours, the smell dissipates. Just remember to let it dry for a full day without touching it. It is crucial not to disturb the repaired item during this time. While the glue is strong, it may not be suitable for paper as it is thick and heavy. When working with delicate tasks, I recommend using toothpicks to apply small amounts of glue.