Gorilla Glue Clear vs Original: What’s The Difference?
For clear bonds, go with the Clear. For gap-filling, grab the Original. Overall for household fixes, the Original comes out on top. But for crafts and visibility, I’d choose the Clear.
- Gorilla Glue Clear vs Original: Specs & Uses
- My Hands-on Test of Gorilla Glue Clear
- My Hands-on Test of Gorilla Glue Original
Gorilla Glue Clear vs Original: Specs & Uses
⏰Drying Time
Gorilla Glue Clear: Full strength after 24 hrs
Original: Full strength after 24 hrs
🆚Moisture Content Requirement
Gorilla Glue Clear: 12-20% for wood
Original: 12-20% for wood
🛠️Common Uses
Gorilla Glue Clear can be used for gluing battens when lining cupboards or for general repairs; creating stone crafts and bonding stones to other stones, wood, or plastic.
Original can be used for bonding metal and wood surfaces; bond styrofoam to wood.
Technical Info
My Hands-on Test of Gorilla Glue Clear
I love it because repairs aren’t as adrenaline-fueled, and I have more leeway in where I glue things.
This glue sets up quickly, and the repairs I’ve made with it have lasted a long time.
✅Works on Acrylic and Metal
pin collection using Gorilla Glue Clear on Acrylic #acrylicpinspins
That’s what I did with Gorilla Glue Clear. It worked great on acrylic and metal, too. I love how sturdy it is now. My experimental piece is a little messy, but the other ones will be neat and tidy. I’m so stoked it worked. So now I’m gonna do all my other bins like this.
In my garden, I needed a reliable glue recently. It’s a brick wall with bricks face up, and a few were laminated during a cold spell. A cheaper and easier process was available to me or I could cut out thirty bricks and replace them. It was a great decision to try Gorilla Glue Clear!
Strong Adhesion
I brushed both surfaces clean after removing the thin laminated brick pieces. After that, I glued one surface. Once the glue was gone, I used a clean rag to stick the two surfaces together. The instructions said to apply pressure for at least 2 hours at room temperature. It was pretty chilly outside, so I put some bricks on top of some wooden blocks. It stayed like that for two days.
It turned out great! Things stuck really well, and the bond is waterproof, so frost shouldn’t be an issue. The rest of the laminated bricks will require another tube or two, but considering the low cost and minimal time investment, it’s worth it.
Sticks Stones to Other Stones, Wood, and Plastic
I also use it for stone crafts. Stones stick to each other, wood, and plastic really well. While it doesn’t stick instantly, once it’s dry, it creates an amazing bond. I even use it to make crafts weatherproof for the garden. You can use it over any paint you’ve used, and it’s super durable. For example, I made a birdbath with pea gravel for a minute stone wall effect, and not a single piece of gravel has fallen off. They’re still just as vivid today as when they were painted during lockdown.
❌Cons
One thing to note is that this glue is more watery than the foaming yellow glue, so you have to be careful with its application. I learned this the hard way when I used it on both rough untreated wood and smooth planed wood. In both cases, the glue ran quite a bit, even dripping all over me. So, just be aware that it’s not the same as the foaming yellow glue, but it can still do a good job, albeit probably better on laid-down things than things on a wall. I would not use this for the main construction where I would use the foaming yellow one, as it is too thin and watery.
FAQ of Gorilla Glue Clear
Q: Is Gorilla Glue Clear resistant to water?
A: Clear Gorilla Glue is water-resistant and can withstand intermittent exposures to water. However, it is not intended for constant soaking. If you require glue that is fully waterproof and can endure prolonged water exposure, I recommend using Original or White Gorilla Glue. These variants are 100% waterproof, assuming the materials they are applied to are not significantly affected by water.
Q: How can I ensure the maximum shelf life of Gorilla Glue Clear?
A: To maximize the shelf life of Gorilla Glue Clear , it is recommended to follow these steps:
- After each use, wipe the nozzle clean with a dry cloth.
- Close the cap tightly to prevent air from entering.
- Store the glue at room temperature.
- If possible, store the glue in an area with access to light.
Q: What should I do if Clear Gorilla Glue gets on my skin?
A: I highly recommend wearing gloves while working with Original, Clear, or White Gorilla Glue. If you accidentally get Gorilla Glue on your fingers or nails, please follow these instructions:
- Initially, try removing the glue by gently wiping it off with a dry cloth or paper towel, especially if the glue is still tacky.
- If wiping alone doesn’t work, wash the affected area with warm water and a gritty soap, or use an exfoliator with a gritty texture.
- After washing, dry your hands and apply lotion to moisturize your skin.
- Please note that cured glue on your fingers may temporarily stain the skin, and it may take a few days for it to wear off completely. It is important to keep your hands moisturized using lotions until the glue is fully removed.
Please avoid using alcohol, acetone, or other solvents as they are not recommended for removing Gorilla Glue from the skin.
2 reviews
📣🔥 Share it to easily keep track of the answers!
Leave a Reply
My Hands-on Test of Gorilla Glue Original
✅DIY Jordan Reglue With Gorilla Glue Original
Update: a Stickyaides Forum OP did the same restoration on his Jordan 14 Forest Greens, click here to take a look.
Durability
I’ve found Gorilla Glue to be a reliable adhesive for a wide range of projects. Gorilla Glue Original helped me hold a steel plate to processed metal for a speaker stand. Despite the expected expansion, I put down paper towels to catch any overflow. Then I gave it two days to cure, and my speakers, weighing 58 lbs each, were securely fastened. They’ve been on their new stands for two months now, and they’re still happy.
Strength of the Bond
One time I had to attach a block of styrofoam to a metal base with glue. Having tried a bunch of glues and adhesives without success, I tried Gorilla Glue. Even though it foamed a bit, the hold it provided was amazing. The styrofoam block stayed firmly in place, and I was amazed at its strength.
❌Cons of Original
Gorilla Glue Original performs well. Things are securely bonded, but they don’t stay in place on contact. You’ll have to let it set for 30 minutes to an hour. The only thing worth noting is that it doesn’t dry clear, so if you want a clear finish, this might not be for you.
I’m Ronald Stevens, a Mechanical Engineer obsessed with adhesives, glue, and all things sticky! My passion began in childhood when I’d always be the one playing with glue during arts and crafts. And I’d spend hours researching and experimenting. Happy reading, and remember: stick with the best, and you’ll never be stuck in a mess!
What sets Gorilla Glue Clear apart from Gorilla Super Glue?
Gorilla Super Glue is specifically designed to dry quickly and is most effective for tight-fitting joints when you need a fast fix. On the other hand, Clear Gorilla Glue offers a longer working time, allowing you to reposition your project as needed. It also provides minimal gap-filling properties, making it suitable for gluing uneven surfaces.