May 6, 2024 7:13 am
Hello everyone,
I have a project that involves bonding PVC pipes together, and I’m considering using Gorilla Glue for the task. However, before proceeding, I wanted to gather some information and advice from the community regarding its suitability and effectiveness for this specific application.
Project Details:
- Surfaces to be bonded: The project involves joining PVC pipes together. These pipes have smooth surfaces, and I want to ensure a strong and durable bond between them.
- Indoor/Outdoor Use: The bonded PVC pipes will be used in an outdoor setting, exposed to various environmental conditions such as temperature fluctuations, moisture, and potential UV exposure. Therefore, it’s crucial to consider the glue’s performance under these circumstances.
- Clamping Availability: I would like to know if clamping is necessary or recommended for Gorilla Glue when bonding PVC pipes. If clamping is required, I’d appreciate any suggestions or tips on how to effectively clamp the pipes during the bonding process.
I understand that using the right adhesive is crucial for a successful and long-lasting bond, especially when working with PVC pipes. Hence, I’m seeking advice from those who have experience or knowledge in this area. If Gorilla Glue is not the ideal choice, I’d be grateful for any recommendations on alternative adhesives that are suitable for PVC pipe bonding.
Sure, take a look at this video.
The video creator @Mack Tyner demonstrated how to repair a cracked PVC pipe using Gorilla Glue, a strong adhesive known for its versatility and durability.
@Mack Tyner began by applying Gorilla Glue directly to the crack in the PVC pipe. The glue was flowing around the pipe messily. Any water present in the crack would actually help the Gorilla Glue seal the pipe more effectively.
Next, he wrapped a kitchen towel around the glued area of the pipe, comparing this step to the process of using fiberglass resin and fabric when building a boat. @Mack Tyner made sure to wrap the towel completely around the pipe, covering the entire damaged section.
Finally, to hold the towel in place while the glue hardened, he secured a rubber band around the repaired area. This simple yet effective technique ensures that the towel remains in contact with the glue, allowing it to cure properly and create a strong, durable seal.