3m Adhesive Remover Vs Goo Gone: What’s The Difference?
3M Remover has a higher flash point, lower VOC, and more definitive technical data available on materials compatibility and product specifications. Goo Gone contains petroleum distillates so it may have more environmental restrictions on use and disposal.
3m Adhesive Remover Vs Goo Gone: Specs & Uses
🌡️Storage Temperature
3m Adhesive Remover: 60-80°F
Goo Gone: Below 122°F
🆚VOC Content
3m Adhesive Remover: 100%
Goo Gone: 99.9% VOC (40CFR 60) or 94.2% VOC (by CARB)
🛠️Common Uses
3m Adhesive Remover can remove adhesives that bond blind spot mirrors to car side mirrors; remove tree sap; remove the adhesive that bonds the front license plate to your car’s front bumper; remove RV Vinyl decorations; remove heavy-duty Velcro backing from a surface, such as a vinyl door frame.
Goo Gone removes glue, glitter, wax, scuff eraser, tar, crayon, and bumper stickers; cleans paint spills, overspray, and drips including acrylic, latex, enamel, and craft paint; remove grease, oil, stickers
Technical Info
My Hands-on Test of 3M Adhesive Remover
✅Simply Spray It On, Let It Work for a Few Minutes
It removes old decals, stickers, and vinyl graphics from vehicles. Whether it’s company logos, racing stripes, or decorative accent pieces, this remover melts away even the oldest and most baked-on adhesives with ease. Simply spray it on, let it work for a few minutes, and the stickers will peel right off – no scraping required! Any residual adhesive can then be removed by reapplying and wiping clean.
But the uses don’t stop there. The 3M Adhesive Remover is also my go-to for removing double-sided mounting tapes used for window visors, front license plates, and more. Just spray it onto the adhesive area and it will release that industrial-strength stickiness with very little effort on your part.
I had a lot of double-stick adhesive on my truck from removing a wind deflector, and this was the best product that successfully removed it. Second to it should be goof off or goo gone.
Goof Off Vs. Goo Gone: Remove Glitter, Wax, Scuff Eraser, Tar, Stains of Ink and Soot
When I had some stickers on my bumper that I tried to remove with Gooby gone, this adhesive remover outperformed it by a long shot. It worked much better in removing the stickers and left no residue behind. I’ve tried Goo Gone, WD-40, and isopropyl alcohol in the past, but none of them were as effective as this adhesive remover. It truly gets the job done.
I’ve even used it to remove built-up tree sap, bugs, wheel weights, and old tire sealants from my vehicles. While it may take some extra soaking time for really stubborn messes, this remover always gets the job done without damaging automotive paint, clear coats, rubber, or most plastics.
Rapid Remover vs. Goo Gone: Remove Tree Sap, 3M Tape Residue, Vinyl Graphics from Tinted Glass, Plasti Dip from Rims
One bonus – it’s amazing for household uses too! I’ve relied on it to strip away old contact paper from windows, dissolve hardened soap scum on shower doors, and remove nail polish spills with zero surface damage. Just be cautious with certain plastics and leather, as it can cause discoloration on some materials.
❌Cons
While I was working on removing vehicle wrap glue from a work van, I decided to give this adhesive remover a try. To my delight, it wiped off the glue effortlessly, leaving the surface clean. However, I did notice that when used on clear or translucent plastic areas like blinkers and lights, the chemical sometimes causes a slight cloudiness even after wiping it off. It’s a minor inconvenience considering the effectiveness of the product.
It’s important to note that you should avoid using this adhesive remover near uncured paint, as it may cause harm. However, when used on fully cured paint, it poses no issues. I personally used it to remove the adhesive residue from the racing stripes on my Mustang, and it did a fantastic job. The paint remained unharmed, and with a little elbow grease, I easily got rid of any residue.
FAQ of 3M Adhesive Remover
Q: Can 3M Adhesive Remover effectively remove tree sap from cars?
A: I haven’t personally tried it, but I believe it should work. I had great success using it to remove various substances from my car.
Q: I attached a front license plate to my front bumper using 3M attachment tape. Should I spray the remover while the plate is still attached or should I remove the plate and tape first?
A: I recommend spraying the remover while the plate is still attached. The spray will help loosen the adhesive, making it easier to remove the plate and tape. I used the spray to remove stripes from my car, and it worked wonders. Simply spray it on, let it soak in a bit, and then proceed with the removal.
2 reviews
📣🔥 Share it to easily keep track of the answers!
Leave a Reply
My Hands-on Test of Goo Gone Adhesive Remover
✅Car Detailing
After removing emblems or decals from my car’s paint, Goo Gone swiftly eliminated any stubborn adhesive residue without damaging the clear coat. It’s also fantastic for refreshing sticky vinyl and plastic interior surfaces – just be sure to follow up with soapy water.
Goof Off Vs. Goo Gone
The main difference between Goo Gone and Goof Off is that Goo Gone is a mild citrus-based solution, while Goof Off is a potent acetone-based formula.
Goo Gone is ideal for removing residue from stickers and tape, while Goof Off is better suited for heavy-duty messes like tar, dried paint, and glue.
Wood Surfaces: I’ve used Goo Gone to strip pesky sticker residues from wood cabinets, book jackets, and even lifting decades-old carpet glue from floors. For unfinished woods, a quick buff with Murphy’s Oil Soap restores the luster.
Walls & Countertops: Removing adhesives from painted walls or countertops is a breeze. Goo Gone powers through tape, stickers, and even cured super glue with some elbow grease. The surface may need a soapy water rinse after, but the adhesive will be history.
Metal Surfaces: Goo Gone is safe on non-lacquered metals like stainless steel appliances. I’ve used it to strip off pesky warranty stickers. Just avoid using it on plated or coated finishes that could be damaged.
Clothing & Fabrics: You can use this clever formula to remove stubborn tape residues from fabrics like denim, wrestling mats, or even technical athletic wear. Simply spot test on an inconspicuous area first, then wash out any oily residues.
❌A Few Don’ts:
As amazing as it is, there are a few surfaces I avoid using Goo Gone on – any electronic screens or devices, delicate plexiglass, and unfinished leathers or vinyls that could potentially stain. When in doubt, test an inconspicuous area first.
I recently had to remove some old clear bra protection film from the front of my 2006 Mercedes. The film had degraded over time from sitting unused in the harsh Texas sun, leaving an unsightly alligator skin texture. I knew removing it would be a nightmare, but it had to go. At first, I tried Goo Gone which barely made a dent in the incredibly stubborn adhesive. Then I tried Rapid Remover <=Click to see my analysis.
💬 FAQ of Goo Gone Adhesive Remover
Q: Is it possible to use Goo Gone Adhesive Remover on car paint?
A: If you want to remove sticker residue from a painted area of your car, it is possible but it may affect the paint. To be on the safe side, test it on a hidden area first, such as inside the trunk lid. If it affects the paint, it will be hidden and not visible.
Q: Can Goo Gone be used on stainless steel? I have an LG fridge that has a 10-year warranty sticker that seems to be glued on with superglue.
A: I did a test on it, click to see my test of goo gone on stainless steel. All in all, Goo Gone can safely be used on true stainless steel as long as you wash it off with soap and water afterward. True stainless steel is non-magnetic.
I have applied a blind spot mirror to my car side mirror using 3M adhesive tape. If I use 3M Adhesive Remover, will it remove the mirror without causing any damage to the car surface?
Using 3M Adhesive Remover should be helpful. However, please exercise caution when applying it to plastic parts, as it may cause fading or discoloration. It appears to be safe for the vehicle paint. Make sure to thoroughly rinse the areas after use.