Barge Cement vs. Shoe Goo: What’s The Difference?
The main difference between Barge Cement vs. Shoe Goo is: For durability choose Barge Cement, and for flexibility opt for Shoe Goo.
- Barge Cement vs. Shoe Goo: Specs & Uses
- Barge Cement Glue for Shoes
- Shoe Goo: Alternative to Barge Cement
Barge Cement vs. Shoe Goo: Specs & Uses
⏰Cure Time
Barge Cement: 16-72 hrs
Shoe Goo: Thin film: 24 hrs, Thick film: 48-72 hrs
🆚Service Temperature Range
Barge Cement: -65°F to 160°F
Shoe Goo: -40°F to 150°F
🛠️Common Uses
Barge Cement is ideal for attaching decorative patches to leather items such as jackets, bags, or shoes; effective for joining porous surfaces, such as fabric, foam, or cork; attaching soles to shoes; adding embellishments to costumes, attaching trims to upholstery, or gluing rhinestones to accessories
Shoe Goo is effective for fixing small holes or tears in shoe fabric and mesh; works well for bonding neoprene and rubber; repair rubber-based shoes like Crocs.
Technical Info
Barge Cement Glue for Shoes
✅Pros: Barge Cement Shoe Repair
Is barge cement good for shoes? Please look at my test:
The sole of the shoe was coming detached, but this glue secured it back together perfectly.
Tips
It’s important to note that this glue is a type of rubber cement, which means it adheres to itself after drying. So, the proper application is to apply a coat to both pieces, let it dry, and then affix them together. It’s different from traditional glue, where you let the glue dry with the pieces touching.
Barge Cement for Leather Palms
In addition to shoe repair, I also used this glue for other tasks. I successfully repaired leather palms on winter mitts by trimming the glue to fit and adding it as a second palm. It worked well, and the mitts looked suitable for snowshoeing. I even used it to fix some Valentino rubber slides that would have otherwise been rendered useless. The glue has been holding up great in all these cases, even after less than 24 hours.
❌Cons: Barge Cement for Shoe Soles
While using this glue, I made sure to work in a well-ventilated area because it does have a strong odor.
💬FAQ of Barge Cement
Q: Is it normal for the barge cement to have a separated oil type substance on top?
A: Yes, it is normal. You can mix it with the brush to restore its consistency.
Q: What distinguishes Barge all-purpose cement from the ‘neutral’ one?
A: Barge all-purpose cement has a much stronger bond than rubber cement or other all-purpose cement. It is comparable to concentrated items, unlike cheaper knock-offs.
Q: Can this glue attach fiberglass?
A: No, you need to use adhesive for fiberglass.
Q: What is the recommended lowest temperature for application?
A: It is best to apply at room temperature.
Q: Can one quart of barge cement adhere to 16 square feet of suede leather and wood?
A: It may not be enough since the glue is quite thick. It would be safer to get two quarts for the intended project.
Q: Is it possible to restore hardened barge cement in the container if it was stored with the cap loose?
A: You can try to stir it and mix in Barge Cement thinner until you obtain the right consistency.
Q: Can barge cement bond wood and steel together?
A: While the company advises against it, barge cement is excellent for joining porous surfaces. To bond to metal, it would require a suitable application that avoids weather and abrasion.
Q: Can barge cement work on PLA or PLA+ 3D printed parts?
A: Yes, it can work on almost any material that won’t melt due to the solvent present in the glue.
Q: How should one apply barge cement? Is it using a brush?
A: Yes, you can use the brush attached to the lid. The glue is thicker than contact cement for rubber.
Q: Is barge cement comparable in quality to Infinite Cement?
A: While the respondent hasn’t used Infinite Cement, they found Barge Cement to work well. They recommend getting Barge Cement thinner along with it.
Q: Does barge cement come with an applicator brush?
A: Yes, the brush is attached to the inside of the cap.
Q: Can you use toluene to thin barge cement?
A: Barge sells a thinner, which is recommended for the best results. Using incompatible chemicals or solvents may produce an inferior quality finished product.
Q: Can barge cement attach decorative patches to leather?
A: Absolutely, it works very well. Apply a light coat to each piece, let them dry, and make sure everything is aligned before pressing them together. Once attached, they won’t be separable.
Q: Is barge cement considered contact cement? Can it work on foam?
A: Yes, it is a type of contact cement. While it is often used on leather, it could work well on foam if it doesn’t melt it. It’s always best to test it on small scrap first.
Q: What is the difference between Barge cement, all-purpose cement, and Barge Infinity cement? Which one is best for shoe soles?
A: The original Barge Cement is what you want for shoe soles.
2 reviews
📣🔥 Share it to easily keep track of the answers!
Leave a Reply
Shoe Goo: Alternative to Barge Cement
✅Pros: Shoe Goo
It holds almost anything together, and its clear and flexible drying properties make it even more versatile.
Rearview Mirrors
I’ve used it to fix not only shoes but also sandals and even the rearview mirrors on my car. I first learned about Shoe Goo from the RC community, where we use it in combination with drywall tape to reinforce our RC car bodies. It’s a simple process of placing drywall tape on the inside of the lexan body and then applying Shoe Goo around it. This creates a flexible layer of adhesive that significantly strengthens and extends the lifespan of our RC car bodies. The versatility of this product is astounding.
Easy to Apply
Applying Shoe Goo is a breeze. It comes in a convenient tube, similar to toothpaste, and it’s easy to spread. I usually use a wooden shish-kabob skewer for application, making cleanup a breeze. One of the things I appreciate about Shoe Goo is that it doesn’t have a strong odor and dries quickly. The cost is also reasonable, and if I can get another year out of my muck boots thanks to Shoe Goo, it’s definitely worth the investment. A coworker recommended this product to me, and he has been using it for years with great success. I wholeheartedly give it a five-star rating.
Fast Cure
When using Shoe Goo, it’s important to note that it dries quickly, so it’s essential to have everything ready for clamping before application. I prefer using throwaway “acid brushes” for application, as they can’t be reused. After use, I make sure to clean the cap area of the tube with a paper towel. To prevent the glue from drying out, I always squish the air out of the tube, allowing a slight amount of glue to ooze out the end before quickly capping it. These precautions ensure that Shoe Goo remains in optimal condition for future use.
❌Cons: Shoe Goo
The smell can be quite potent, which may bother individuals with sensitivity to strong scents or those who prefer odorless products. It’s advisable to use Shoe Goo in well-ventilated areas or outdoors whenever possible.
FAQ of Shoe Goo
Q: Would Shoe Goo bond neoprene and rubber materials? I need to repair the fin booties.
A: Yes, Shoe Goo should work for bonding neoprene and rubber. I have used it to re-attach rubber soles that separated from the main part of sneakers. As long as the surfaces are clean, Shoe Goo creates a strong, flexible bond with most shoe materials including rubber, neoprene, synthetics, and leather.
Q: Is Shoe Goo effective for use on leather?
A: I have used Shoe Goo on leather shoes multiple times with good results. Each time I purchase new leather shoes, I apply Shoe Goo to the leather sole for added durability. About a year ago, I used it to repair a pair of leather shoes and they are still holding up well. Overall, I have found Shoe Goo works effectively on leather.
Q: When dispensed from the tube, what should the consistency of the product be? The product I received looks lumpy and not very adhesive.
A: I have received a product that was old or improperly stored and had a grainy, lumpy consistency rather than a smooth paste. In my experience, when Shoe Goo is fresh and ready to use, it dispenses as a thick, smooth adhesive. If it appears lumpy, dried out, or lacks strong adhesiveness, it may need to be discarded and replaced. I would recommend confirming the freshness date and storage details for the best results.
Q: Does Shoe Goo bond well to rubber and leather materials?
A: Yes, I have found Shoe Goo works very well for bonding rubber and leather. I used it to repair my Crocs sandals, which are made of rubber, and the bond is still holding strong. While I have not personally used it on leather shoes yet, based on its effectiveness with rubber and synthetics, Shoe Goo should also create a durable bond with leather as it is designed for shoe repair.
Q: Once opened, how long will this product last before drying out or becoming unusable?
A: Shoe Goo has an ample shelf life once opened if stored properly. I purchased a 4-pack of tubes just to have spares on hand for future use. As long as the tube opening is sealed well after each use, a single tube of Shoe Goo can last many months. I used one full tube within 6-8 months after opening with no issues. However, extreme heat or extended direct sunlight exposure could speed up drying and reduce its usefulness quicker.
For the best results, seal the tube well when not in use and store it in a cool, dry location away from extreme heat. As with any adhesive, if it has become very thick, stringy, or shrunk significantly from the sides of the tube, it is best to discard it and start with a fresh tube. But with proper storage and for casual use, a single open tube of Shoe Goo should retain a usable consistency for 6-12 months.
Q: Would Shoe Goo work for bonding a metal horseshoe?
A: Shoe Goo is primarily intended and designed for repairing and bonding shoes made of materials like rubber, leather, and fabrics. It likely would not create a strong, durable bond with metal materials such as a horseshoe. For bonding metal, you would be better served using a product specifically designed for use with metal substrates, such as a metal-epoxy or heavy-duty construction adhesive. You can find those heavy duty adhesives here:
– Gorilla Heavy Duty Construction Adhesive – 5 Best Adhesive For Foam Board To Metal
– Rhino Glue Gel, Heavy Duty 40 Gram Clear – best glue for lego sets
While Shoe Goo is a great product for its intended use with shoes, metal bonding requires a different solution.
Q: I applied one tube of product to the inner midsole of my Nike Air Max shoes after the sole separated. Kept clamped with weights for 72 hours. The sole fell off again within a week of normal wear. Any tips to help the bond last longer?
A: It sounds like the bond between the midsole and outer sole of your Nikes may have been too damaged or weak for Shoe Goo alone to repair long-term.
I’m Ronald Stevens, a Mechanical Engineer obsessed with adhesives, glue, and all things sticky! My passion began in childhood when I’d always be the one playing with glue during arts and crafts. And I’d spend hours researching and experimenting. Happy reading, and remember: stick with the best, and you’ll never be stuck in a mess!
Feel free to contact me and join our discussion:
Can barge cement be reapplied over itself or is it necessary to remove the residue first?
You can put another coat on top of the original one as long as the surface is not too rough or dirty.