Speaking of the best adhesive for foam board to concrete, it is a task that sounds simple enough but can quickly turn into a sticky situation if you use the wrong adhesive. Believe me, I’ve been there, frantically trying to pry foam pieces off the garage floor after using glue that just didn’t have the grip.

So I’ve done the dirty work of testing out the top contenders for best foam-to-concrete adhesive. I squeezed, stuck, peeled, scraped, and weighted to find the glue that passed my adhesion tests with flying colors. No foam bits left behind on the concrete here!
Stick with me as I break down the need-to-know on three foamboard types of glue that have the strength and staying power to hold on tight to concrete. I’ll give you the sticky details on how they performed in my experiments, so you can decide which is the best fit for your projects. Let’s get stuck in!
What Are The Requirements to Be the Best Adhesive for Foam Board to Concrete?
Consider these features before buying the adhesive to bond foam board and concrete (you might also be interested in the best adhesive for foam board to bond metal)
Why This Feature | |
---|---|
Strong Bond Strength | Creates a robust, durable bond between the porous foam board and rough concrete surface |
Flexibility | Accommodates expansion/contraction of foam board and concrete at different rates due to temperature changes |
Moisture Resistance | Maintains strong bond despite concrete’s tendency to absorb moisture and condensation |
Quick Setting/Curing | Sets and cures rapidly to firmly fix foam board in place |
Low VOC/Low Odor | Has low VOCs and odor for better indoor air quality |
Strong Initial Tack 🛍️ SikaBond Construction Adhesive

✅Pros
The first time I used SikaBond Construction Adhesive was for attaching Styrofoam boards to an aluminum garage door. The bond it created was impressive, and I was thrilled with the results. The adhesive held the boards securely in place, giving me peace of mind that they wouldn’t come off easily.
Encouraged by my initial success, I decided to tackle a more demanding project involving stucco. I had heard from other users that this adhesive was the best choice for such applications. With confidence, I set out to bond marble on entrance block stuccoed columns. The adhesive performed flawlessly, providing a strong and durable bond that exceeded my expectations.
Not only did the adhesive work well for stucco, but it also proved effective for other applications. I had a metal roof project where I needed to secure pavers to cap a column. Using the same adhesive, the process went smoothly, and the results were excellent. The pavers remained firmly in place, with no signs of sagging on the vertical surface.
In terms of longevity, this adhesive has proven to be reliable. I used it to seal roof jacks on a metal roof, and it has remained pliable and durable for months after application. The bond it creates is strong, and I have complete confidence in its performance.

❌Cons
However, not all experiences were perfect. There was one instance when the shipping box caused minor damage to the product. Despite this setback, the adhesive itself was not affected, and I was able to use it without any issues.
One important aspect to note is the applicator choice. When I initially used a manual caulk gun, I found it challenging to squeeze out the adhesive. It was a bit too thick for this type of gun, and it started leaking from the nozzle. I realized that a mechanical caulk gun would have been a better option for this particular adhesive.

Easy alignment 🛍️ Loctite PL300 Foamboard Adhesive

Finding the right adhesive that doesn’t dissolve the foam is crucial, and Loctite Foam Adhesive has proven to be a reliable choice for sticking foam to itself and other materials. Its thick and gooey consistency allows it to work effectively even when there are gaps between the materials.
✅Pros
In my recent project, I needed to bond a 4ftx8ftx1in foam board to a concrete wall. I applied generous 2-inch “globs” in the top corners, center, and bottom, along with three lines of caulk down about two-thirds of the length. The bond created by the Loctite Foam Adhesive was excellent!
I was pleasantly surprised to find that I could get more than two sheets per tube, closer to three. Although some of the older tubes I had started to separate, I simply discarded the first few ounces of caulk that were separated, as they didn’t hold well. Once you get to the good caulk, it works perfectly. The adhesive is also easy to clean off hands with water, which is a plus.

Although primarily designed for bonding foam board, I’ve also found this adhesive useful for attaching polystyrene acoustic diffusers together. It’s a versatile product that proves its worth beyond its intended purpose.

❌Cons
However, I must admit that it can be a bit messy when it comes to using it with a caulk gun. The adhesive tends to keep oozing even after you’re done applying it, regardless of whether you retract the plunger or try to block the nozzle. To tackle this issue, I’ve learned to keep a putty knife handy underneath the caulk gun to collect the excess adhesive.
Now, there’s something important to note if you’re placing foam board against a wall that might have even the slightest chance of leaking or sweating. It’s crucial to avoid applying the caulk in a “squiggle” pattern, as it could potentially catch and hold moisture. Instead, I recommend running the caulk lines straight down or in a constantly dropping zig-zag pattern. This way, any water that finds its way in will always have a way out.
FAQ of Loctite PL300 Foamboard Adhesive
Q: Is it effective to install foam board on metal, such as in a trailer?
A: I bought Loctite PL300 Foamboard Adhesives specifically for that purpose, and it worked wonderfully. I’ve written an article about foam to metal adhesive. Feel free to read it. Best of luck with your trailer!
Q: Can this adhesive bond foam to metal?
A: I successfully used it to bond vinyl on one side and a metal frame on the other, and it worked excellently.
Q: Will it adhere to the “foil” side of the foam board?
A: This adhesive is great for foam, but it doesn’t adhere well to foil.
Q: Can it stick to a vinyl vapor barrier?
A: Absolutely, it adheres well to a vinyl vapor barrier.
Q: Will it work on polypropylene?
A: Loctite PL 300 Foamboard Construction Adhesive is not recommended for use on polypropylene.
Q: I want to glue large pieces of foam together for a trailer couch. Will this adhesive work for that?
A: This adhesive is designed for rigid foam insulation boards, so it may not work well for a trailer couch. I suggest consulting a car interior shop or searching online for suitable options.
Q: Can this adhesive work on cheap, white styrofoam used for packing material?
A: Yes, you can use this adhesive to custom-fit packing material as needed. Just keep in mind that it dries to a light blue color and remains harder than the styrofoam it sticks to. Thicker coats will take longer to harden, while thin coats fully harden within 24 hours.
Q: What temperature can this adhesive withstand? Can it be used in an attic space?
A: It should work fine in an attic space unless you live in a very hot climate like Florida.
Q: Can it glue polyisocyanurate (TuffR)?
A: I’m not familiar with polyisocyanurate (TuffR), but we used this adhesive successfully for gluing foam board insulation.
Q: Which caulking gun should I buy for the Loctite PL 300 Foamboard Construction Adhesive 28-ounce cartridge?
A: Any standard caulking gun will suffice. However, consider investing in a higher-quality one for better performance. Also, ensure that the trigger and pressure release are easily accessible with one hand.
Q: Will Loctite PL300 Foamboard Adhesive laminate PVC boards together?
A: It is very likely to work. If the surfaces are smooth, the adhesion may be less effective, but roughening the surfaces will improve bonding.
Q: I applied liberal lumps of adhesive on foam board against a metal door, securing it with blue tape instead of clamps. Will it work once it’s dry?
A: The adhesive will set in approximately 24 hours, but thicker lumps may take longer. Using tape instead of clamps may result in uneven contact and thicker lumps in the center areas.
Q: Does it ever dry?
A: Yes, it will dry completely within a few hours at warm temperatures.
Q: Can PL 300 be painted?
A: Once fully cured, which takes about 7 days depending on various factors, including temperature and substrate porosity, it can be painted. However, please note that it is not intended for exposed applications like caulking or sealing.
Q: Can I use this adhesive to attach the vinyl baseboard to wood?
A: Yes, it should work well for attaching a vinyl baseboard to wood.
Q: Will this adhesive bond styrofoam window trim to stucco?
A: If you apply the adhesive thick enough to ensure good contact with the stucco, it should work. However, keep in mind that it doesn’t dry quickly, so you’ll need to hold the trim in place for a significant amount of time.
Specialized Foam Formula 🛍️ DAP DynaGrip Foamboard Adhesive

✅Pros
In terms of adhesion, this adhesive is exceptional. However, I must mention that their claim of it being ‘easy to gun’ is a bit ambitious. I’ve encountered issues with about half of the tubes I’ve used, as they had an excessive amount of bubbles, resulting in gaps, sputters, and uneven flow. Nevertheless, when the adhesive is free of air pockets, it applies smoothly with steady pressure. It spreads evenly and adheres well once pressed into place, although it tends to slip until you can secure it.
To test its effectiveness, I used this adhesive to bond Pink Foamboard to the inside of plywood siding, leaving a small gap for later filling and sealing with expanding foam. I created foam wedges from the leftover scraps of the foam board panels and strategically placed them to provide support.

Next week, I plan to apply a spray foam sealant to further enhance the insulation in the shed-to-house project I’m working on for my eldest and their small family. Since the cavities are open at the front, I don’t anticipate any major issues, except for a narrow gap I initially started with. Overall, I’m eager to see how well this adhesive holds up to the application of the spray foam sealant.
❌Cons
One thing to note about this adhesive is that it takes over 24 hours to cure fully. During this curing period, I found that the foam board tends to move, which can be a bit frustrating. However, I’m planning to try polyurethane (Gorilla) glue for my next project as it offers a faster cure time and is known to be compatible with foam board. I’ve had some disappointments with other products from this company in the past, but I’m hopeful that the polyurethane glue will be a better fit.

Flexible bond 🛍️ Loctite PL Premium Polyurethane Construction Adhesive

✅Pros
The first thing that struck me about this adhesive is its remarkable bonding strength. I had a broken concrete tank lid that needed fixing, and this adhesive worked wonders. Just by following the instructions carefully, I was able to achieve a solid and permanent bond. It held up incredibly well, even in challenging conditions.
But it wasn’t just limited to concrete repairs. I had a wobbly toilet that needed to be securely mounted to the floor, both for safety and to keep the wax seal intact. While silicone caulk or tile grout might offer temporary fixes, I knew I needed something more reliable. That’s where the Loctite Construction Adhesive came in. I carefully applied it between the toilet and the floor, ensuring a clean application.

In addition to its excellent performance with concrete and toilets, I even put it to the test on a ceramic cat figurine that had been broken. Superglue failed me, but the Loctite Adhesive came to the rescue. After a day, the statue was as good as new. I was impressed by its versatility and ability to bond different materials effectively.

FAQ of Loctite PL Premium
Q: What are the primary distinctions between this product and the more affordable premium 3x version?
A: This version boasts a quicker setup time and offers a more durable and stronger bond.
Q: Can I utilize this for attaching an aluminum exterior door threshold to a concrete floor?
A: I have successfully employed heavy-duty Loctite to install an aluminum threshold onto a concrete base, and it is held securely. However, the new threshold had pre-drilled holes for metal screws to affix to the concrete. For optimal adhesion with heavy-duty Loctite, I recommend applying it to a clean surface on a warm day.
Q: How can I detach items that have been firmly adhered together? I accidentally misaligned a frame on a mirror.
A: You can use mineral spirits to undo the adhesion.
Q: Is Loctite PL Premium suitable for bonding molded plastic to concrete?
A: Yes, it is.
Q: Will Loctite PL Premium work for reattaching a sizeable chunk of concrete to a sidewalk?
A: Yes, it should. I used it to glue the head of a concrete statue back into place, and the weight of the baseball-sized head was sufficient to hold it together while the glue set. Press the pieces together so that the glue makes contact with both surfaces. You will need a means to hold the pieces in place until the adhesive sets, but it does not have to be tightly clamped.
Q: Can I use Loctite PL Premium to reattach river rocks?
A: Yes, you can. However, if you intend to place them vertically, they will require support until the adhesive cures.
Q: How dark is Loctite PL Premium? I’m looking for a shade similar to iron gray.
A: The product is dark gray. It can also be painted. Overall, it is a good product.
Q: How much of the product do I need to cover a 75-square-foot wall?
A: Yes, you will need it.
Q: Does Loctite PL Premium withstand high heat? That’s the specific feature I’m searching for.
A: No, it will become extremely brittle and start cracking even in low heat or sunlight. Moreover, it may be separate from the materials it was applied to.
Q: Will Loctite PL Premium work for a rubber-to-tile application?
A: I haven’t encountered any issues with rubber-to-concrete applications, so it should work fine.
Q: Can Loctite PL Premium adhere to the roofing felt?
A: Yes, it can, although there might be more suitable and cost-effective adhesives available specifically for roofing purposes.
Q: What color does Loctite PL Premium dry to?
A: I believe this construction glue comes in two, possibly three colors. I purchased the gray variant to glue a broken concrete statue, and it dried to a gray shade. Therefore, if you choose white, it will dry white, and if there’s a black variant, it will dry black. I’m uncertain if a black option exists, but the adhesive should dry to the color corresponding to the one you choose.
Q: Do you think I can replace a loose and nearly detached shower tile with Loctite PL Premium? I need it to match the grout color, which is gray.
A: Yes, this adhesive is suitable for securing a single piece of tile. It should hold it in place securely. However, for a long-lasting and more professional repair, it is recommended to reattach the tile using tile adhesive or thin-set mortar specifically designed for tile installations. These products provide better adhesion and durability for tile applications.
High Strength 🛍️ Gorilla Heavy Duty Construction Adhesive

Before starting, I made sure to clean the surface of the concrete thoroughly to ensure a strong bond. I applied the Gorilla Glue to the foam board, following the instructions provided. The glue applied easily and didn’t create a messy situation, which was a relief.
✅Pros
Once I pressed the foam board onto the concrete, I held it in place for a few minutes to allow the glue to set. Afterward, I checked the bond, and I was pleasantly surprised by how securely the foam board was attached. It showed no signs of coming loose, even in areas with heavy foot traffic.
I was also pleased to find that the Gorilla Glue held up well despite exposure to heat and moisture. I live in a region with hot summers and occasional monsoons, but the bond remained strong, without any signs of deterioration.
Another project where I used Gorilla Glue was to secure a rubber seal on my concrete garage floor. The glue worked wonders, providing a solid bond with minimal mess. I appreciated that it came in a generous tube, as I had plenty of glue to work with.
In addition to its effectiveness on foam board and rubber seals, I found Gorilla Glue to be versatile for various home repairs. I used it to reattach vinyl and wood tiles, as well as to seal a bathroom vanity and medicine cabinet. It held everything firmly in place, even in high-moisture areas like the bathroom.
❌Cons
While using Gorilla Glue, it’s important to keep in mind that it forms a permanent bond once dried. So, it’s crucial to be precise in application and ensure proper placement. However, this permanence also means that the bond is incredibly strong and reliable.

💬 FAQ of Gorilla Heavy Duty Construction Adhesive
Q: How much time does it usually take for this adhesive to form a bond? I’m having trouble getting it to stick.
A: This adhesive is a polyurethane glue that requires moisture to bond effectively. To ensure a strong bond, moisten the surfaces to be glued. If the surface is non-porous, lightly sand it to create a rough texture that allows water to adhere in the grooves.
Q: Can I use this adhesive to bond plastic to concrete?
A: Gorilla Heavy Duty Construction Adhesive is suitable for bonding concrete and certain types of plastics. However, please note that it is not compatible with polyethylene and propylene plastics.
Q: Is this adhesive based on urethane?
A: Gorilla Heavy Duty Construction Adhesive is not urethane-based.
Q: How does this adhesive compare to Liquid Nails? I need a strong adhesive for gluing t-mold transition pieces for my vinyl plank flooring.
A: Gorilla Construction Adhesive is an excellent solution for both trim and molding. Gorilla Heavy Duty Construction Adhesive is a versatile “All Surface, All Purpose” adhesive with a 100% waterproof formula that does not shrink or crack over time. It offers fast grab, easy dispensing, and a paintable bond that usually does not require clamping. The hybrid chemistry provides a slightly flexible finish with superior durability, making it suitable for bonding dissimilar materials and withstanding various indoor and outdoor environments.
Q: Can this adhesive be used for bonding bricks? I want to use it for the edges of the bricks.
A: This adhesive is an all-purpose solution.
Q: What does “100% waterproof” mean exactly? Does it refer to the adhesive’s resistance to moisture or its ability to seal the substrate from moisture, or both?
A: Gorilla Heavy Duty Construction Adhesive being “100% waterproof” means that it can withstand contact with moisture.
Q: Hi, I need a strong adhesive. Can I use it to bond loose bricks on my stairs?
A: Gorilla Heavy Duty Construction Adhesive can be used on brick surfaces. However, it is not recommended for structural applications unless used in conjunction with mechanical fasteners.
Q: How many hours should I wait after applying the adhesive before it can be exposed to rain safely?
A: We recommend allowing a full 24-hour cure time before exposing Gorilla Heavy Duty Construction Adhesive to rain.
Q: I have a patio slider where the vinyl is partially delaminating from the wood frame in one corner. Can I use this adhesive to reattach it?
A: Gorilla Heavy Duty Construction Adhesive can be used for vinyl-to-wood applications.
Q: Can this adhesive hold concrete and wood together, such as attaching a wooden fence to a concrete patio?
A: Gorilla Heavy Duty Construction Adhesive is suitable for bonding wood and concrete surfaces.
📣🔥 Share it to easily keep track of the answers!