E6000 Vs. Epoxy: Waterproof & Hard Coatings for Homemade Fishing Lures
Last updated on March 29, 2024/Reviewed by Ronald, a 🎖️10-year Adhesive Industry Veteran @stickyaides in 🌉San Francisco
E6000 Vs. Epoxy: what’s the difference?
E6000 is good for bonding plastic, rubber, metal, ceramic, leather, canvas, etc. Epoxy works well for wood, metal, glass, stone, and some plastics; Epoxies can be used for coating and casting while E6000 is mainly just an adhesive.
E6000: Dissolves in some solvents like gasoline, toluene etc.
Epoxy: Good resistance to water, dilute acids and bases
🛠️Common Uses
E6000 can be used for various fabric crafts and repairs, such as bonding patches, attaching embellishments, or repairing torn seams; is a rubber contact adhesive that can fill small gaps, allowing for a strong bond even on uneven surfaces
Epoxy can be used to fix a variety of items, such as broken fishing rod eyelets, cracked coffee mugs, separated shoe soles, and loose bumper strips; attach plastic trim to metal surfaces, mount bathroom accessories, and secure plastic to wood or roughened metal surfaces
In summary, E6000 is a flexible craft adhesive suitable for indoor applications on various materials, while Loctite Epoxy Quick Set is a rigid structural adhesive better suited for metal bonding and gap filling applications, with faster cure time but lower flexibility.
What Is Loctite Epoxy Quick Set
Loctite Epoxy Quick Set dries clear, making it ideal for bonding translucent materials like glass. I’ve used it to securely attach metal components to glass bases, and the bond has held up remarkably well even under significant weight and pressure – up to 200 psi in the case of bonding aluminum pipes together with a 1/4 inch epoxy layer.
✅Repairing Cracked Plastic Speaker Cones
One project I tackled was repairing cracked plastic speaker cones, and the Quick Set worked like a charm, solidly bonding the cracks. I’ve also had success using it to affix metal hooks to spackled and painted indoor walls, though I would caution that any excessive weight could cause the spackle layer to separate. For installing undermount sinks, it serves perfectly for affixing the clips, though the silicone sealant is what truly secures the sink long-term.
Attach a Metal Plaque to a Granite Bench Outdoors
I once needed to attach a metal plaque to a granite bench outdoors, and Loctite Epoxy Quick Set proved to be the perfect solution. Following the instructions, I squeezed out and mixed the two-part epoxy on a paper plate using a popsicle stick. After applying it to the plaque, I secured it in place with painter’s tape while it dried. The adhesive held up remarkably well, enduring temperature changes and remaining as strong as when it was first applied, even after several months.
These PVC clamps work really well with Loctite Epoxy
In terms of surface preparation, I’ve found it bonds well to materials like polycarbonate, quartz, calcite, and even brick when the surfaces are roughed up and cleaned properly beforehand. However, it’s important to note that while it can hold screws in granite countertops once fully cured, any continual weight hanging from those screws could eventually cause failure. Drilling directly into granite is not recommended.
I applied two applications of the epoxy, allowing for a 24-hour hardening period as directed. Afterward, I stained the walking stick and applied multiple coats of spray-on polyurethane finish.
The handy double-syringe packaging allows you to dispense just the amount needed, preventing waste. The directions printed could be more clear, but the process is straightforward: remove the plug, cut the syringe tips, depress the plungers to expel a small amount of the two components onto a surface, mix for one minute, then apply. The set time is a very reasonable 5-10 minutes.
Versatility
I’ve found it to be a superior alternative to traditional glue or crazy glue. The 5-10 minute setup time is also highly convenient, allowing ample time to work with the epoxy. For mixing, I found that a piece of packing tape stuck to my workbench serves as a practical mixing surface, and a wooden stick does the job perfectly. Once I’m done, I simply peel off the tape and discard it along with the stick.
❌Unused Mixture Must Be Discarded
One downside is that any unused mixture must be discarded, as it cannot be stored premixed for later use. But the ability to precisely control the amount dispensed helps minimize this issue. I’ve also found that if the two components don’t mix properly, it can prevent complete curing.
While the epoxy is water-resistant once fully cured, its ability to withstand harsh chemicals like bleach is unclear from my experience. It’s always wise to check the manufacturer specifications before exposing it to strong solvents or cleaners.
FAQ of Loctite Epoxy Quick Set
Q: The sole of my soccer shoes has started to separate. Can this epoxy glue it back together?
A: Unfortunately, no. You will need E6000 adhesive for that.
Q: When constructing a shadow box, can Loctite Epoxy be used on felt?
A: It’s likely to bleed through the felt. I suggest trying a “ca” type glue, which can be found in my article ca glue and activator for wood.
Q: I have a plastic bumper, and I accidentally backed into a trailer. Can it secure a new chrome strip to my plastic bumper?
A: Personally, I haven’t had any success with glues or epoxies made by Loctite. They haven’t worked well for me. I suggest trying a different brand like Devcon.
Q: Could I use Loctite Epoxy to fix and strengthen broken bumper tabs?
A: It should work fine on hard plastics.
Q: I need to bond hard plastic to glass. Gorilla glue didn’t work. Any thoughts on using Loctite?
A: I’ve had good results using Loctite forbonding hard plastic to glass. Make sure to clean both surfaces thoroughly before applying the epoxy and follow the instructions provided by Loctite for the best results. It’s always a good idea to test a small area first to ensure compatibility and adhesion.
2 reviews
Michael Cadorette
Can I use Loctite Epoxy to attach a plastic trim to a metal part of a door?
Yes, I have employed this epoxy to adhere plastic to metal. The process involved lightly sanding the back of the smooth plastic to create a rougher surface for improved adhesion. After cleaning both the plastic and metal, I mixed the two-part epoxy, applied a small amount to each piece, waited for about 30 seconds for the epoxy to become tacky,…Read More
Yes, I have employed this epoxy to adhere plastic to metal. The process involved lightly sanding the back of the smooth plastic to create a rougher surface for improved adhesion. After cleaning both the plastic and metal, I mixed the two-part epoxy, applied a small amount to each piece, waited for about 30 seconds for the epoxy to become tacky, and then joined them together. It worked perfectly. I hope you have a similar experience!
I recently purchased this E6000 glue for some beveled jewelry projects and I am extremely pleased with the results. The product arrived quickly in good packaging and is perfect for working with various materials such as leather, gemstones, bones, and metal. It is easy to work with and cures well even in humid conditions. The bond created between dissimilar materials, like a metal hoop and a stone pendant, is strong and durable.
✅Pros
The fierce smell of the glue does require using it in a well-ventilated area, and it’s not for quick applications. However, it is some of the best stuff out there for small projects that need to stay stuck.
I love that these come in small tubes because you only need a tiny bit, and the large tubes tend to dry out before you can use them all. These small tubes are perfect for my smaller projects and prevent any waste, as the glue doesn’t dry up.
I have used this glue on wood, rubber, and metal, and it sticks well.
The secret is to let it sit for 24 hours before any use. I highly recommend this glue for various crafting projects, such as craft tumblers, and prefer the one that dries clear.
Hot glue provides a fast, easy bond for lightweight crafts, but has poor longevity, especially with heat exposure. E6000 forms an extremely strong permanent bond on nearly any surface and withstands heat, but is more difficult to work with and emits toxic fumes.
Still two layers eva, 4 nylon straps with two bucks and adjustments, one just goes over top, other crosses and goes around ankle. Shot of damage for showing it is not perfect, but I also probably could have been more vigilant and keeping it tight. No sewing, e6000 glue.
PlasmaGryphon
Overall, E6000 glue has proven to be much better than any other adhesive I’ve tried and I will definitely continue using it for my future projects.
FAQ of E6000
Q: Is E6000 completely waterproof for use in a snow globe?
A: Yes, this glue is completely waterproof and can be used in a snow globe.
Q: Can this glue be used to adhere glass to metal, such as a car window to a metal track?
A: It’s not recommended to use this glue for car windows. It’s best to use an adhesive specifically made for car windows.
Q: Can D6000 adhere metal to wood, such as metal knobs to a wooden coat rack?
A: It’s not certain if this glue will work for this purpose, as it may depend on the amount of strain put on the object.
I’m Ronald Stevens, a Mechanical Engineer obsessed with adhesives, glue, and all things sticky! My passion began in childhood when I’d always be the one playing with glue during arts and crafts. And I’d spend hours researching and experimenting. Happy reading, and remember: stick with the best, and you’ll never be stuck in a mess!
Feel free to contact me and join our discussion:
Can I use Loctite Epoxy to attach a plastic trim to a metal part of a door?
Yes, I have employed this epoxy to adhere plastic to metal. The process involved lightly sanding the back of the smooth plastic to create a rougher surface for improved adhesion. After cleaning both the plastic and metal, I mixed the two-part epoxy, applied a small amount to each piece, waited for about 30 seconds for the epoxy to become tacky,…Read More
Yes, I have employed this epoxy to adhere plastic to metal. The process involved lightly sanding the back of the smooth plastic to create a rougher surface for improved adhesion. After cleaning both the plastic and metal, I mixed the two-part epoxy, applied a small amount to each piece, waited for about 30 seconds for the epoxy to become tacky, and then joined them together. It worked perfectly. I hope you have a similar experience!
Show Less