E6000 vs. Gorilla Glue: What’s the Difference?
Cure time is where Gorilla Glue shines brightest. It grabs hold lickety-split, bonding in just 10-45 seconds flat. Meanwhile E6000 takes its sweet time, needing a full 24-72 hours to fully set. So for fast repairs Gorilla Glue is the hare to E6000’s tortoise.
- E6000 vs. Gorilla Glue: Specs & Uses
- My Hands-on Test of E6000
- My Hands-on Test of Gorilla Glue (Gorilla Super Glue Gel)
E6000 vs. Gorilla Glue: Specs & Uses
🤸♀️Flexibility
E6000: Highly flexible
Gorilla Glue: Less flexible than E6000
🆚Temperature resistance
E6000: -40°F to 150°F
Gorilla Glue: -40°F to 200°F
🛠️Common Uses
E6000 can be used to attach cork tiles to aluminum patio ceiling; completely waterproof; bonding metal decorative knobs to a small wood coat rack.
Gorilla Glue is suitable for bonding stainless steel; bond Ceramic Tile to Wooden Picture Frame; hold decorative plates on wall.
Technical Info
My Hands-on Test of E6000
✅Pros: E6000
Fix Soles
Recently, I had the soles of my beloved desert boots separate prematurely, but with this glue, I was able to repair them and give them a new lease on life. The repair has held up for years and shows no signs of giving in.
Dries Clear
One great aspect of E6000 is that it dries clear and remains clear and flexible for a long time. However, over time, it may develop a slight yellowing, but it’s nowhere near as noticeable as epoxy, which tends to turn dark yellow and brittle, especially when exposed to sunlight. Some plastics may require you to rough up the surface to ensure proper adhesion.
To ensure the longevity of the glue, it’s crucial to keep the cap and tip clean and well-sealed. Otherwise, it will dry up in the tube. Additionally, it’s advisable to use this glue in a well-ventilated area as it has a strong odor while drying. When used properly, this glue is absolutely fabulous!
Better Than Super Glue
There was a time when every household had a bottle of Super Glue. It was indispensable for all those little projects and repairs. However, over time, it lost its appeal. While it provided great adhesion, it was too rigid and would often break and flake on certain items. It became clear that Super Glue was no longer a reliable resource.
But then, E6000 entered the scene like a phoenix rising from the ashes. It’s super strong, flexible, and easy to work with, which I’ve tested in my article about e6000 super glue. There are different types available, so make sure to read the labels carefully. But in general, E6000 is now the go-to choice for repairs.
GS Hypo Cement Vs. E6000
The main difference between GS Hypo Cement Vs. E6000 is: E6000 has better-specified properties like viscosity, cure time, elongation, temperature range, and chemical resistance. However, E6000 contains toxic ingredients while GS Hypo Cement does not.
G-S Hypo Cement is a versatile adhesive that works well with Beadalon
and other stretchy cords used in beading. Heck, E6000 is ideal for bonding and repairing all kinds of materials, indoors and outdoors.
❌Cons: E6000
It’s important to exercise caution while using this glue. It can seep into fabric and become nearly impossible to remove, so be careful not to get it on your clothes. Once it sets, it’s incredibly hard to remove, so it’s best to plan ahead and protect the parts you don’t want to be affected by taping them off or covering them. Before applying the glue, make sure to clean the intended repair points, especially if they are dirty or oily. Using alcohol or another cleaner that won’t leave residue is recommended.
💬 FAQ: E6000
Q: Is it possible to use E6000 to attach cork tiles to my aluminum patio ceiling in Florida, considering the high temperatures?
A: We successfully used E6000 to bond synthetic fireplace logs in a gas fireplace heater, which can withstand intense heat. Therefore, I am confident that it will also endure the hot summer temperatures in Florida when used to attach cork tiles to your aluminum patio ceiling.
Q: I have used E6000 on fabric before. Can you provide insights on its durability in such applications?
A: I have personally utilized E6000 for various crafting projects involving wood
, plastic, and rubber, and it has proven to be highly durable. However, when using it on fabric, it is crucial to be mindful of the quantity applied. Excessive application may cause bleeding, while insufficient amounts may result in poor adhesion. As long as you carefully control the amount used, it will work effectively on fabric.
Q: I plan to use E6000 for a snow globe project
. Can I rely on its complete waterproofing?
A: Absolutely! E6000 is completely waterproof, making it an excellent choice for adhering items in a snow globe. You can use it with confidence for your project.
Q: What is the recommended method for cleaning up this glue?
A: To clean up E6000, it is advisable to use disposable items such as a toothpick, q-tip, or straw, which can be discarded after use.
Q: I’m interested in adhering foam to the plastic lid of a Pelican case. Can I use E6000 for that purpose?
A: I’m not familiar with what a “Pelican” case is, but you can certainly use E6000 to attach foam to plastic surfaces. For optimal results, I suggest lightly sanding the plastic with 220-grit sandpaper to enhance adhesion. Additionally, ensure that the surface is clean by wiping it down with acetone or 90% alcohol. Good luck with your project!
Q: Can I use E6000 on waterproof fabric?
A: The suitability of E6000 for waterproof fabric depends on the specific composition of the fabric’s waterproofing treatment. If a wax compound was used, it is unlikely that any adhesive will adhere properly. However, if certain types of plastics were employed, thorough surface preparation will be crucial for achieving a successful bond. Make sure to remove any film buildup or dirt from the surface before applying the adhesive.
2 reviews
📣🔥 Share it to easily keep track of the answers!
Leave a Reply
My Hands-on Test of Gorilla Glue (Gorilla Super Glue Gel)
✅Pros
The glue is a gel, which makes it easy to control how much product you use, and it is not too sticky when applied. However, it does require caution when using it since it is very sticky instantly and can cause issues if you do not prepare the job before using it.
Holds Silver Strip on the Suitcase
One example of my use so far was when the decorative silver strip on my suitcase’s pull-out handle was popping out. Before it broke off and caused either an injury to the hand or weakened the handle, I decided to apply the Gorilla Super Glue Gel to reattach it permanently. And by permanently, I mean it! This glue should hold that silver strip in place long after the rest of the suitcase is destroyed! This stuff feels tough!
Versatility
Gorilla Super Glue Gel is also versatile since it can be used on different types of materials, such as plastic, wood, and fabric, which is a plus. It is also long-lasting and does not dry out quickly, which is something that I have experienced in the past with other similar products.
❌Cons
However, there are some precautions to keep in mind when using this glue. For instance, I had to be careful while cleaning the nozzle after each use since moistening the nozzle with a towel can solidify the fresh gel almost instantly onto the nozzle. It is easier to let the gel dry a bit and break off the dried gel. Also, the glue dries fast, so I had to hold the piece in place for the first minute or so to ensure that it sets on an uneven spot with divides.
💬 FAQ of Gorilla Glue
Q: Is it safe to use Gorilla Super Glue Gel on glass surfaces?
A: We don’t advise using Gorilla Super Glue Gel on the glass as the bond may weaken over time due to the alkalinity in the glass.
Q: Can I use this to bond stainless steel to stainless steel?
A: Yes, it should work.
Q: Does Gorilla Super Glue Gel work well on metal?
A: Yes, it works on metal surfaces.
Q: Where can I find the Gorilla Glue?
A: I was searching for the Gorilla Glue I usually use and stumbled upon it.
Q: Can I use Gorilla Super Glue Gel to bond a silicone gasket to steel containers?
A: Hello, Gorilla Super Glue Gel works on steel surfaces, but gluing silicone is considered “trial and error.”
Q: Why do I need to mist water when using Gorilla Glue?
A: Gorilla Super Glue doesn’t require water. Only Original Gorilla Glue needs water since it is a moisture-curing polyurethane.
Q: Is it possible to use this to glue a ceramic tile to a wooden picture frame?
A: Yes, you can use it if the tile is already self-adhesive and you want to reinforce it. Once applied, make sure the glue is completely dried for a period of time.
Q: Is Gorilla Super Glue Gel safe for use on Styrofoam?
A: I have found it to adhere to everything, but I cannot advise on the fumes when working with Styrofoam.
Q: Can I use it to fix a handle on a microwave?
A: Yes, I used it to fix a plastic knob on my dryer, so it might work for your microwave handle.
Q: Will it hold decorative plates on the wall?
A: It is strong enough to hold decorative plates on the wall, but when you reposition or remove the plates, the glue may rip a big hole in the wall. Therefore, I wouldn’t recommend it for this application.
Q: Can Gorilla Super Glue Gel be used to bond aquarium ornaments?
A: Gorilla Super Glue Gel isn’t waterproof, and we cannot confirm it’s non-toxic once cured. We also don’t advise using Gorilla Glue products in applications that could lead to direct food contact or consumption or in situations where glue may be ingested.
Q: Can I use this glue to attach something to the wall?
A: Yes, Gorilla Super Glue Gel works on most surfaces and is thick enough to be used for vertical applications.
Q: What’s the difference between 102433xl & 7700104 or the best glue under constant twisting pressure?
A: Gorilla Super Glue products dry rigid and not flexible.
Q: Can I use Gorilla Super Glue Gel to bond vinyl to EPO foam?
A: We don’t recommend using Gorilla Super Glue Gel on foam materialsas it may dissolve or eat away at the foam. For bonding vinyl to EPO foam, we recommend using a specialized adhesive designed for foam materials.
I’m Ronald Stevens, a Mechanical Engineer obsessed with adhesives, glue, and all things sticky! My passion began in childhood when I’d always be the one playing with glue during arts and crafts. And I’d spend hours researching and experimenting. Happy reading, and remember: stick with the best, and you’ll never be stuck in a mess!
Feel free to contact me and join our discussion:
Is it possible to use Gorilla Glue to bond steel to wood?
I wouldn't recommend using this glue for that purpose. I suggest using an epoxy resin for a strong bond instead.