What’s the difference between Gs Hypo Cement and Gorilla Glue?
Both products should be stored away from heat, direct sunlight, ignition sources and oxidizing agents. Gs Hypo Cement is water hazardous and can be harmful to aquatic life. Gorilla Glue is only moderately harmful to aquatic life. G-S Hypo Cement is a water-clear adhesive that remains transparent even after drying. It does not cause cloudiness or harm to the applied surfaces. Please note that it is designed for non-porous flat surfaces.
- Gs Hypo Cement Vs Gorilla Glue: Specs & Uses
- Gs Hypo Cement Review
- My Hands-on Test: Gorilla Glue Clear
Gs Hypo Cement Vs Gorilla Glue: Specs & Uses
🧪Main Ingredients
Gs Hypo Cement: Xylenes, heptane
Gorilla Glue: N-(3-(trimethoxysilyl)propyl)ethylenediamine, Bis(1,2,2,6,6-pentamethyl-4-piperidyl) sebacate
🆚Appearance
Gs Hypo Cement: Transparent liquid
Gorilla Glue: Colorless liquid
🛠️Common Uses
Gs Hypo Cement performs excellently with bead looming; bonding non-porous surfaces like plastic beads and fired ceramic; does not cloud or damage surfaces, making it suitable for rhinestone applications; leather cord to lobster claw clasp.
Gorilla Glue can be used for creating stone crafts and bonding stones to other stones, wood, or plastic; perfect for projects where a hard and clear finish is desired
Technical Info
Gs Hypo Cement Review
For securing knots in hemp cord, I needed something waterproof, clear, flexible, and strong, and this cement did the trick.
✅Pros: Gs Hypo Cement
If you’re bonding metal like sterling silver or copper wire, G-S Hypo Cement can work, but it’s not the best choice for a permanent bond. However, I appreciate that the manufacturer recommends experimenting with the cement to figure out if it’s right for what you’re doing. In case it doesn’t work, you can remove the residue with rubbing alcohol, nail polish remover, or acetone.
The long-lasting hold and flexibility it provides make it ideal for securing knots in stretchy string bracelets, which is a common task in my jewelry making process.
E6000 Glue Vs Gs Hypo Cement
The main difference between GS Hypo Cement Vs. E6000 is: E6000 has better-specified properties like viscosity, cure time, elongation, temperature range, and chemical resistance. However, E6000 contains toxic ingredients while GS Hypo Cement does not.
G-S Hypo Cement is a versatile adhesive that works well with Beadalon
and other stretchy cords used in beading. Heck, E6000 is ideal for bonding and repairing all kinds of materials, indoors and outdoors.
You might want to know more by reading my article about GS Hypo Cement Vs. E6000.
Stretch Bracelets
I primarily apply it to knots when finishing stretch bracelets. The precision tip allows me to place a single drop exactly where I need it. It provides a strong and flexible hold once it’s dry, which is perfect for keeping knots in place on stretchy string bracelets. The fact that it dries clear is another bonus, and it doesn’t have an unpleasant smell either.
It’s great for sealing knots in stretchy cords used for beading, like Beadalon. It’s worked great for me. It’s all about tying proper knots, finishing with a surgeon’s knot, and then applying cement. Drys beautifully and stays soft, ensuring a long-lasting bond.
Gs Hypo Cement Glue Drying Time
However, it’s worth noting that there are no instructions on the box or bottle regarding the drying time. I had to visit the manufacturer’s website, where I discovered that it typically dries after about one hour but can take up to 24 hours to dry completely, depending on humidity.
Tips
When squeezing the tube, do so lightly, especially if nothing is happening when you turn it upside down. I find it helpful to wiggle and shake the end I’m holding to encourage the glue to come out. It’s important to have a tissue on hand to wipe the tip while holding the tube upright until the cap is back on, as this prevents it from getting glued shut. Lastly, to put the needle end cap back on, it’s necessary to switch hands while holding the end of the tube. I recommend placing your middle or ring finger behind the opening to hold it steady and help guide the needle cap on. Finally, storing the glue in its box is advisable to prevent it from getting smashed and causing a mess when opened again.
❌Cons
The glue tends to have a constant flow from the fine tip, resulting in a glop of glue on the table or paper when I set it down to quickly finish a project. Additionally, when I go to put the needle cap back on, I need to wipe off the excess glue that oozed out. Another minor challenge is that putting the needle cap back on can be tricky, especially in bad lighting, requiring good eyesight and dexterity.
FAQ: Gs Hypo Cement
Q: How well does it perform when used for bead looming?
A: It performs excellently with bead looming.
Q: Can I safely use Gs Hypo Cement to attach plastic beads to ceramic?
A: G-S Hypo Cement is highly recommended for bonding non-porous surfaces such as plastic beads and fired ceramic.
Q: Does Gs Hypo Cement have any adverse effects on rhinestones?
A: G-S Hypo Cement is a water-clear adhesive that remains transparent even after drying. It does not cause cloudiness or harm to the applied surfaces. Please note that it is designed for non-porous flat surfaces.
Q: Can I utilize Gs Hypo Cement to attach a leather cord to a lobster claw clasp?
A: Gs Hypo Cement comes in a small tube with a fine applicator, ideal for precise applications. However, I would recommend using E6000 or Liquid Fusion for attaching the leather cord to the clasp.
Q: Would Gs Hypo Cement be suitable for neodymium/rare earth magnets?
A: G-S Hypo should work on non-porous surfaces like neodymium/rare earth magnets. We suggest conducting a test before applying it fully.
Q: I used this glue on a bracelet, and it broke immediately after applying it when stretched. How long does it need to cure?
A: Typically, this glue cures within a few minutes. However, considering the bracelet broke, it’s worth considering if the issue was with the glue or the elasticity. It’s possible that the elastic was too tight, causing the breakage.
Q: Does this cement produce strong fumes and require ventilation during use?
A: G-S Hypo Cement is specifically designed for delicate jewelry work that involves minimal glue usage. The fumes it emits are negligible, and the small tube size further reduces any noticeable scent.
4 reviews
📣🔥 Share it to easily keep track of the answers!
Leave a Reply
My Hands-on Test: Gorilla Glue Clear
✅Pros: Gorilla Glue Clear
One of the things I love about this glue is its versatility. I have used it to stick concrete to brick, plastic to metal, and even wood to wood. It seems to work on everything!
Repairing Delicate Items
When it comes to repairing delicate items like foam crafts or upholstering toy boxes, this glue does a fantastic job. It’s sturdy and reliable, ensuring that the product stays in place once it’s dried. However, it does take a while to dry completely, so it’s not suitable for fixing things that can’t be held together for a few minutes.
Fix Garden Pot
I recently had to rebuild a large garden pot, and this glue came to the rescue. The fact that it dries clear was a big advantage, as it kept the repair discreet. The bond it created was strong, but I did find the consistency a bit too runny, causing it to drip everywhere. If it were a bit thicker and dried a bit quicker, it would be perfect.
Curing Times
One thing to keep in mind is the curing times. While this glue is excellent when used properly and with patience, it’s not an instant bond. You have to be aware of the drying time, but once it’s fully cured, it can last for years, even with low usage. Just make sure to keep the bottle sealed to prevent it from drying out.
❌Cons: Gorilla Glue Clear
If you’re sensitive to strong odors, you might want to take precautions. However, I can’t deny that it holds plastic crafts together extremely well. It’s just essential to have the patience to wait for the drying process.
FAQ: Gorilla Glue Clear
Q: Is Gorilla Glue Clear resistant to water?
A: Clear Gorilla Glue is water-resistant and can withstand intermittent exposures to water. However, it is not intended for constant soaking. If you require glue that is fully waterproof and can endure prolonged water exposure, I recommend using Original or White Gorilla Glue. These variants are 100% waterproof, assuming the materials they are applied to are not significantly affected by water.
Q: How can I ensure the maximum shelf life of Gorilla Glue Clear?
A: To maximize the shelf life of Gorilla Glue Clear , it is recommended to follow these steps:
- After each use, wipe the nozzle clean with a dry cloth.
- Close the cap tightly to prevent air from entering.
- Store the glue at room temperature.
- If possible, store the glue in an area with access to light.
I’m Ronald Stevens, a Mechanical Engineer obsessed with adhesives, glue, and all things sticky! My passion began in childhood when I’d always be the one playing with glue during arts and crafts. And I’d spend hours researching and experimenting. Happy reading, and remember: stick with the best, and you’ll never be stuck in a mess!
Feel free to contact me and join our discussion:
Will Gs Hypo Cement cause any damage to natural pearls?
Rest assured, it is safe for pearls and various gemstones. It has been successfully utilized on metals, costume jewelry, and pearls without any issues.
Is Gs Hypo Cement safe to use for attaching a watch dial?
I have successfully used this glue to attach silk string salt water pearls, but watch dials may require a vacuum-sealed attachment method.