Liquid Fusion Glue Vs. E6000: What’s The Difference?
One thing to notice is that Liquid Fusion Glue it not recommended for use on acrylic, Using Liquid Fusion Glue on acrylic nails may cause them to fall off. It’s recommended to opt for a quick-setting glue instead.
Liquid Fusion Glue Vs. E6000: Specs & Uses
⏰Drying Time
Liquid Fusion: Thin film: Fast drying; Thick film: 48-72 hrs
E6000: Thin film: 24 hrs; Thick film: 48-72 hrs
🆚Best Materials
Liquid Fusion: Versatile craft adhesive, bonds wood, plastic, fabric, glass, etc.
E6000: Permanent craft adhesive, bonds wood, metal, glass, masonry, etc.
🛠️Common Uses
Liquid Fusion can serve as a permanent sealer for diamond paintings; safe to use with fiber optics. Its clear polyurethane/acrylic formula does not generate heat during curing; securing a new rubber sole to certain materials (excluding VBA foam on running shoes) and gluing items to a steering wheel.
E6000 can be used for various fabric crafts and repairs, such as bonding patches, attaching embellishments, or repairing torn seams; completely waterproof.
Technical Info
What Is Liquid Fusion Glue
✅Non-Foaming, Low-Odor Formula
Let me tell you, Liquid Fusion never fails me. Whether I’m securing rhinestones on tumblers, gluing jewelry resin to plastic, or attaching sequins to fabric, this glue is up for the task. Its non-foaming, low-odor formula makes it a dream to work with, and the clear finish means no unsightly residue.
There’s a lot you can do with Liquid Fusion. It adheres beautifully to stone, unglazed ceramics, wood, fabrics, metal, styrofoam, and even steering wheels! I’ve used it to repair terracotta ornaments (although for that, E6000 is recommended), glue neoprene to aluminum bars sandwiched with Lexan, and secure lids to plastic water bottles for sensory bottles.
Liquid Nails Vs. E6000: Rubber to Plastic, Metal to Acrylic & Webbing to Nylon
But wait, there’s more! This glue is also ideal for diamond painting projects, acting as a permanent sealer to keep your masterpieces looking their best. And if you’re working with delicate materials like fiber optics, no need to worry – Liquid Fusion dries completely clear without generating any heat.
While Liquid Fusion provides a good initial tack, it takes time to fully cure and reach its maximum bond strength. I usually leave my projects overnight or even a few days, especially for heavier or outdoor pieces. But trust me, the wait is worth it for the incredible durability you get.
Speaking of durability, this glue is tough as nails! It can withstand freezing temperatures and thawing cycles without losing its integrity, making it perfect for both indoor and outdoor use. And if you ever run low, no need to panic – you can easily purchase the convenient 2 oz bottle size online.
When it comes to application, I find that using a syringe with a fine tip works best for precise placement, especially when filling in gaps between rhinestones or other embellishments.
❌contain dipropylene glycol dimethyl ether and triethylamine
Now, let’s talk about the not-so-fun part: the ingredients. While Liquid Fusion is an incredibly useful product, it does contain dipropylene glycol dimethyl ether and triethylamine, which can be eye and skin irritants. As with any adhesive, it’s essential to follow proper safety precautions and work in a well-ventilated area.
FAQ of Liquid Fusion Glue
Q: Is Liquid Fusion Glue suitable for styrofoam?
A: This is an industrial glue that works best on porous surfaces such as stone, unglazed ceramics, and wood. And, being industrial strength, it may not react well with foam. Because foam is a difficult item to glue, a better option for you would be an adhesive specially formulated to work with foam, like glues in the best adhesive for foam board to concrete.
Q: Can Liquid Fusion Glue be used to attach a new rubber sole to VBA foam on running shoes?
A: Liquid Fusion Performance Adhesive breaks through the barriers of traditional urethane glues with versatile, powerhouse strength that’s non-foaming and low odor. Its proprietary clear formula provides incredible holding power to surfaces, forming waterproof bonds with maximum staying power. It works best on stone, unglazed ceramics, wood, fabrics, and more. However we are unfamiliar with the VBA foam you want to glue, so we recommend you try the shoe glue alternative here.
Q: Will Liquid Fusion Glue work on metal surfaces?
A: Yes, it should work on metal. Make sure the surface is free of contaminants. Bonds will be stronger if you can sand or buff the area that will be glued.
My Hands-on Test of E6000
✅E6000 is Versatile
I’ve used it to glue clear vinyl to a convertible soft top, reattach a broken shelf in the refrigerator, repair shoe soles, bond wood pieces for arts and crafts, and even affix an antique crystal plate to its base. No matter the material – vinyl, metal, plastic, fiberglass, wood, you name it – E6000 adheres it together with a strong, waterproof, and flexible bond.
The adhesive has a thick, gel-like consistency right out of the tube. The “medium viscosity” version flows out nicely for spreading, while the “high viscosity” stays put better for vertical applications. There’s even a UV-resistant “Marine” formula made for outdoor use. Once applied, it self-levels and then dries to a rubbery, slightly flexible state. I’ve found it takes at least 24 hours to fully cure and reach maximum bonding strength.
I have to mention that I’ve had some disappointing experiences with other glues, like shoe goo (see my review here: e6000 glue vs shoe goo), which didn’t work on my shoes. However, the E6000 came to the rescue. It successfully fixed my sneakers and sandals, and I couldn’t be happier with the results. It’s become my go-to glue for all my shoe-related fixes.
E6000 vs. Shoe Goo: Attach Zippers to Cloth Tote Handbags, Metal Caps to Wooden Salt
One note is that E6000 takes some patience during the drying stage. You really need to clamp or brace the bonded pieces and let them set undisturbed for the first 30 minutes to an hour. I’ve watched many a good TV show during this critical holding period! But that patience pays off with an incredible bond.
❌Does Not Provide Enough Shear Strength Long-Term
While E6000 works great for many heavy-duty projects, there are some limitations. I wouldn’t use it to hang a large mirror or glue automotive door handles, as it may not provide enough shear strength long-term. For PVC pipe repairs, an actual plumbing adhesive may be a better choice. And you’ll want to avoid using it on anything going in your ears like a hearing aid mold.
FAQ of E6000
Q: Is E6000 completely waterproof for use in a snow globe?
A: Yes, this glue is completely waterproof and can be used in a snow globe.
Q: Can this glue be used to adhere glass to metal, such as a car window to a metal track?
A: It’s not recommended to use this glue for car windows. It’s best to use an adhesive specifically made for car windows.
Q: Can D6000 adhere metal to wood, such as metal knobs to a wooden coat rack?
A: It’s not certain if this glue will work for this purpose, as it may depend on the amount of strain put on the object.
Q: How can this glue be cleaned up?
A: Use a disposable item such as a toothpick, q-tip, or straw for cleanup.
Q: Would E6000 work to glue foam to a plastic lid of a Pelican case?
A: Yes, this glue can be used to attach the foam to plastic, but it’s recommended to scour the plastic surface with 220 grit first and make sure it’s clean with acetone or 90% alcohol.
Q: What is the maximum temperature that this adhesive can withstand for a ceramic plate setter in a grill/smoker?
A: It’s unlikely that this glue is designed to withstand such high temperatures.
Q: Is E6000 resistant to gasoline and does it harden?
A: It’s uncertain if this glue is resistant to gasoline, but constant exposure to gasoline may erode the bond. The glue remains somewhat flexible when it dries. However, I’ve written an article about “plastic fuel tank repair epoxy” that should be resistant to gasoline, feel free to read it.
I’m Ronald Stevens, a Mechanical Engineer obsessed with adhesives, glue, and all things sticky! My passion began in childhood when I’d always be the one playing with glue during arts and crafts. And I’d spend hours researching and experimenting. Happy reading, and remember: stick with the best, and you’ll never be stuck in a mess!
Feel free to contact me and join our discussion:
📣🔥 Share it to easily keep track of the answers!